Sharp 240T Power Saver, Management system, Check that the display, Your PC or video board is an

body2.fm Page 22 Monday, September 18, 2000 8:53 AM

Appendix

Table 3. Troubleshooting – Image (Continued )

What you see...	Suggested Actions	Reference
Screen is blank and	n The monitor is using its power	Power Saver, page 20.
power indicator light is	management system.
steady amber or blinks	n Move the computer’s mouse or
every 0.5 or 1 seconds
	press a key on the keyboard
Image is not stable and	n Check that the display	Display Modes, page 25.
may appear to vibrate	resolution and frequency from
	your PC or video board is an
	available mode for your monitor.
	On your computer check: Control
	Panel, Display, Settings
	n If the setting is not correct, use	Installing the Video Driver,
	your computer utility program to	page 6.
	change the display settings.
	NOTE: Your monitor supports multiscan display functions within
	the following frequency domain:
	n Horizontal frequency:	30 kHz-81 kHz
	Vertical frequency:	56 Hz-85 Hz
	Maximum refresh rate:	210T: 1600 x 1200 @ 60Hz
		240T: 1920 x 1200 @ 60Hz
Image is not centered	n Adjust the horizontal and	H-Position, page 13.
on the screen.	vertical position.	V-Position, page 13.
You need the monitor	n Download the driver from WWW
driver software	pages:
	http://samsungelectronics.com/
	support/downloads/monitor/
	index.html

English 22