Sharp 240T, 210T manual Monitor doing so may create the danger of electric shock, Electric socket

Page 4
Safety Instructions

Safety.fm Page 2 Monday, September 18, 2000 8:43 AM

1

Before connecting the AC power cord to the DC adapter outlet, make sure the voltage

designation of the DC adapter corresponds to the local electrical supply.

2

Never insert anything metallic into the cabinet openings of the Liquid Crystal Display (LCD)

monitor; doing so may create the danger of electric shock.

3

To avoid electric shock, never touch the inside of the LCD monitor. Only a qualified

technician should open the case of the LCD monitor.

4

Never use your LCD monitor if the power cord has been damaged. Do not allow anything to

rest on the power cord, and keep the cord away from areas where people can trip over it.

5

Be sure to hold the plug, not the cord, when disconnecting the LCD monitor from an

electric socket.

6

Openings in the LCD monitor cabinet are provided for ventilation. To prevent overheating,

these openings should not be blocked or covered. Also, avoid using the LCD monitor on a

bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the LCD monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation.

7

8

Put your LCD monitor in a location with low humidity and a minimum of dust.

Do not expose the LCD monitor to rain or use it near water (in kitchens, near swimming pools, etc.). If the LCD monitor accidentally gets wet, unplug it and contact an authorized dealer immediately. You can clean the LCD monitor with a damp cloth when necessary, but be sure to unplug the LCD monitor first.

9

Place the LCD monitor on a solid surface and treat it carefully. The screen is made of thin

glass with a plastic front surface and can be damaged if dropped, hit or scratched. Do not

clean the front panel with keton-type materials (e.g., acetone), ethyl alcohol, toluene, ethyl acid, methyl, or chloride – these may damage the panel.

10

11

Locate your LCD monitor near an easily accessible AC outlet.

If your LCD monitor does not operate normally – in particular, if there are any unusual sounds or smells coming from it – unplug it immediately and contact an authorized dealer or service center.

12

13

14

High temperature can cause problems. Don’t use your LCD monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat.

Unplug the LCD monitor when it is going to be left unused for an extended period of time.

Unplug your LCD monitor from the AC outlet before any service.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

English 2

Image 4
Contents SyncMaster 210T SyncMaster 240T COVER.fm Page 2 Monday, September 18, 2000 843 AM Table of Contents Technician should open the case of the LCD monitor Monitor doing so may create the danger of electric shockElectric socket Unpacking Your Monitor Deutsch FrançaisSetting up an Ergonomic Workstation Setting up Your LCD MonitorKensington Security Slot Connecting Your LCD Monitor Français EnglishInstalling the Video Driver Self-Test Feature Check StfcPower Indicator Plug and PlayGetting Help Warm-up TimeAdjusting Your LCD Monitor User ControlsAutomatic Save FunctionFunction Description Use this button to change a video sourceFollow these instructions to adjust the brightness Use this button to optimize image quality automaticallyCoarse, and Image Position Use this button to change BrightnessAccessing the menu system Function name Setting bar Tool TipFunction icons Contrast BrightnessImage Lock Position Color controlImage Size Sharpness PC. Refer to Small windowVideo Source 2 Super Video Signal S-Video Displayed side by side PBP OFF Disable PBP featureSelects one OSD language out of six different languag- es Information Resolution ExampleSync. Types and frequencies with polarities Left Key By Remote-ControlUp Key PowerSaver AppendixTroubleshooting Power Saver, Panel, Display, SettingsChange the display settings Management systemSpecifications 210T 240TDVI-D Connector Pin D-sub connectorPin Assignments Preset timing modes Display ModesIndex NumericsUser Instructions Regulatory InformationUser Information Germany