Profile series with Codec C60 | Administrator Guide |
Contentsontents
IntroductiIntroduction
GetGettinging startstarted
AboutAbout tthe menuss
| The setSettingsings menumenu |
| TheTheSSettingsttingsSe ti Librarylibrarylibrary |
| Camerasa eras |
|
|
|
|
|
|
|
|
AppenAppendicesic
ContactContact us
The Audio settings, continued...
Audio Input Microphone [1..
4] Mode:
<On/Off>
Determines whether or not a microphone input is enabled. Addresses the specific microphone input. On: Set to On to enable the microphone input.
Off: Set to Off to disable the microphone input.
Example: Audio Input Microphone 1 Mode: On
Audio Input Microphone [1..
4] Type:
<Microphone/Line>
The microphone inputs are intended for electret type microphones. The microphone input can be set to line or microphone mode. Addresses the specific microphone.
Microphone: 48 V Phantom voltage and
Line: Select Line when you have a standard balanced line input. The phantom voltage and
Example: Audio Input Microphone 1 Type: Line
The Audio settings, continued...
Audio Output Line [1..
2] Level:
<-24..0>
Defines the output level of the specified Audio Output Line in steps of 1 dB from
See the Audio Level tables in the Codec C60 System Integrator Guide for a complete overview of the menu values represented in dB.
Range:
Example: Audio Output Line 1 Level:
Audio Output Line [1..
2] Mode:
<On/Off>
Determines whether or not an Audio Line output is enabled. Addresses the specific Audio Line output. On: Set to On to enable the Audio Line output.
Off: Set to Off to disable the Audio Line output.
Example: Audio Output Line 1 Mode: On
Audio Output HDMI
[1..
1] Level:
<-24..0>
Defines the output level of HDMI output 1 in steps of 1 dB from
See the Audio Level tables in the Codec C60 System Integrators Guide for a complete overview of the menu values represented in dB.
Range:
Example: Audio Output HDMI 1 Level: 0
Audio Output Line [1]
Type:
<Auto/SPDIF>
Determines if the Audio Line output is an analog or digital type output.
Auto: If a TANDBERG Digital NAM is detected then SPDIF mode will be selected, otherwise analog mode will be selected.
SPDIF: Set to SPDIF when you want the Audio Line 1 output to be in digital mode.
Example: Audio Output Line 1 Type: Auto
Audio Output HDMI
[1..
1] Mode:
<On/Off>
Determines whether or not the audio channel on the HDMI output should be enabled. On: Set to On to enable the audio channel on the HDMI 1 or HDMI 3 output.
Off: Set to On to disable the audio channel on the HDMI 1 or HDMI 3 output.
Example: Audio Output HDMI 1 mode: On
Audio Output Line [1..
2] Channel:
<Left/Right/Mono>
Defines whether the Audio Line output is a mono signal or part of a multichannel signal. Left: The Audio Line output signal is the left channel of a stereo signal.
Right: The Audio Line output signal is the right channel of a stereo signal.
Mono: The Audio Line output signal is a mono signal.
Example: Audio Output Line 1 Channel: Left
Audio Output Line [2]
Type:
<Analog>
Applies to Line 2: This is an analog output.
Example: Audio Output Line 1 Type: Analog
Audio SoundsAndAlerts KeyTones Mode:
<On/Off>
The system can produce a sound every time a key on the remote control is pressed. On: There will be a sound indicator when pressing keys on the remote control.
Off: The key tone on the remote control is switched off.
Example: Audio SoundsAndAlerts KeyTones Mode: Off
Audio SoundsAndAlerts RingTone:
<Marbles/IceCrystals/Polaris/Alert/Discrete/Fantasy/ Jazz/Nordic/Echo/Rhythmic>
Selects the ringtone for incoming calls.
Range: Select a tone from the list of ringtones.
Example: Audio SoundsAndAlerts RingTone: Jazz
29 |