Profile series with Codec C60 | Administrator Guide |
Contentsontents
IntroductiIntroduction
GetGettinging startstarted
AboutAbout tthe menuss
The setSettingsings menumenu
TheS ttingsSettingsLibrarylibrary
CamerasCa rass
AppenAppendicesic
ContactContact us
The PrecisionHD 1080p camera
Video out (HDMI,
Power and camera control. For power in and camera control, connect from the camera control & power on the camera to
The orange LED illuminates while in a call and flickers when there is an
incoming call.
the Camera port on the codec. When the camera is used with TANDBERG codecs power will be supplied through Camera Control cable. When used with
HDMI and HD-SDI
•HDMI is the main source for video out when connected to Codec C60. Maximum resolution is 1080p60.
•
•The HDMI and
Kensington lock
The Kensington lock may be used to prevent the camera to be moved from its place or to prevent theft.
Cascaded cameras
The sockets named Extra Camera Out and Power In are used when connecting cameras in daisy chain.
•The first camera in the chain is powered up by the camera control cable. The next cameras must use the 12V DC Power in.
•The daisy chained cameras are connected by using an extra camera cable between the Extra Camera sockets.
The green LED is continuously illuminated when power is On, but it flickers when receiving signals from the remote control.
NOTE: The green LED is hidden behind the top grille on TANDBERG Profile 65”. Disassemble the top grille to see the LED.
The lens hood is detachable.
We recommend that you mount it to prevent stray light from disturbing your video experience.
Just snap it on gently.
HDMI and
See the TANDBERG PrecisionHD 1080p User Guide for comprehensive information about the camera.
Go to: 
http://www.tandberg.com/docs
Kensington lock
Power Supply | Camera Control | HDMI Video Out | Not Used |
Extra Camera Out and for Daisy Chaining |
| ||
48 |