TANDBERG Video Portal | Data port Command Interface User Guide |
OptionKeyAdd
OptionKeyDelete
RestoreDefaultServices
ServiceEntryDelete
•Cause: <1…> Cause code specifying why the command was not accepted by the system
•Description Textual description of the cause code.
Example:
xCommand feedbackregister url:http://10.47.14.185:8000 expression.1:status/call expression.2:status/conference
*r Result (status=OK): ID: 2
*r/end
OK
Command used to set new option keys.
Parameters:
•Key(r): <S: 0, 90> option key
NOTE! Always reboot the system after adding option keys, for the option key to take effect.
Example:
Xcommand OptionKeyAdd
*r Result (status=OK): / *r/end
OK
Command used to delete option keys.
Parameters:
•Key(r): <S: 0, 90> option key
Example (Delete Option Key nr. 1): xCommand OptionKeyDelete 1
*r Result (status=OK): / *r/end
OK
Command used to restore the factory default services.
Example:
Xcommand RestoreDefaultServices
*r Result (status=OK): / *r/end
OK
Command used to delete services from the Video Portal.
Parameters:
•ServiceEntryNumber(r): <1..100>
D1392602 | 30 |