Sharp XR-55X, XR-50S appendix Specifications

Specifications

Model				XR-55X	XR-50S
Display devices				0.55" DLP® Chip ×1
Resolution				XGA (1024 × 768)	SVGA (800 × 600)
Lens	F number			F 2.4 – 2.6
	Zoom			Manual, ×1.20 (f = 19.0 – 22.7 mm)
	Focus			Manual
Input terminals	Computer/Component			×1
	(mini D-sub 15 pin)
	S-Video (mini DIN 4 pin)			×1
	Video (RCA)			×1
	Audio (ø3.5 mm stereo minijack)			×1
	Audio (RCA)			×1 (L/R)
Output terminal	Computer/Component			×1
	(mini D-sub 15 pin)
Control and	USB (Type B)			×1
communication
	RS-232C (mini DIN 9 pin)			×1
terminals
Speaker				7W (Mono)
Projection lamp				210 W
Rated voltage				AC 100 – 240 V
Rated frequency				50/60 Hz
Input current				2.8 A
Power consumption		Eco+Quiet	AC 100 V	274 W
		Off	AC 240 V	265 W
		Eco+Quiet	AC 100 V	215 W
		On	AC 240 V	210 W
Power consumption		Quick Start	AC 100 V	3.0 W	2.6 W
(STANDBY Mode)			AC 240 V	3.7 W	3.2 W
		Eco	AC 100 V	0.32 W
			AC 240 V	0.77 W
Operation temperature				41ºF to 95ºF (+5ºC to +35ºC)
Cabinet				Plastic
Dimensions (main body only) [W × H × D]				11 52/64" × 3 1/8" × 9 19/64"
				(300 × 79 × 236 mm)
Weight (approx.)				6.2 lbs. (2.8 kg)

As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product improvement without prior notice. The performance specifi cation

figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

This SHARP projector uses a DLP® chip. This very sophisticated panel contains 786,432 (XR- 55X)/480,000 (XR-50S) pixels (micromirrors). As with any high technology electronic equip- ment such as large screen TVs, video systems and video cameras, there are certain accept- able tolerances that the equipment must conform to.

This unit has some inactive pixels within acceptable tolerances which may result in inactive dots on the picture screen. This will not affect the picture quality or the life expectancy of the unit.

70