Sharp XG-SV100W, XG-SV200X Projector Control, On the remote control, To select the Input mode

Page 21
On-screen display
BP. 31

4. Adjust the angle

Adjust the projector angle:

• Shift the lens horizontally and vertically.

1 Press H&V SHIFT on the remote control. 2 Press P, R, O or Q on the remote control.

• Adjust the projector angle by rotating the adjustment feet.

BP. 29

5. Adjust the focus and the zoom

1Press FOCUS +/– on the remote control to adjust the focus.

2 Press ZOOM +/– on the remote control to adjust the zoom.

BP. 30

6. Correcting the image distortion due to the projection angle

1Press KEYSTONE on the projector or on the remote control.

2 Press ENTER on the projector or on the remote control.

3 Press P, R, O or Q to move the position for the upper left of the image.

4 Press ENTER to set the position.

5 Repeat the same procedure with the positions for the upper right, lower right and lower left of the image.

•When the position of the lower left is set, the correction is

made and the display disappears.

7. Select the Input mode

On the projector

Press INPUT R/P to display the INPUT list. Use INPUT R/P to select the Input mode, and use O/Q to select the audio input terminal.

INPUT list

 

On the

On the remote

INPUT

Audio

projector

control

 

 

 

 

1 COMPUTER1

2 MONITOR OUT

HHDMI

On the remote control

Press HDMI, COMPUTER 1/2, S-VIDEO, VIDEO

to select the Input mode.

BP. 34

8. Turn the power off

Press STANDBY/ON on the projector or STANDBY on the remote control, and then press the button again while the confirmation message is displayed to put the projector into Standby mode.

On the

On the remote

projector

control

BP. 27

Easy Start

17

Page 20 Page 22
Image 21
Page 20 Page 22
Contents XG-SV100W XG-SV200X SetupModel No Serial No Iii Page Void the users authority to operate this equipment See bottom of projectorInformation Product Disposal For Future Reference Maintenance Troubleshooting IndexContents Selecting the Transmission Speed ReferencePower Sources CleaningAccessories Power-Cord ProtectionReplacement Parts Damage Requiring ServiceSafety Check OverloadingAvoid locations with extremes of temperature Rest your eyes occasionallyDo not block the exhaust and intake vents Using the projector in other countries Temperature monitor functionOther connected equipment Setup Manual Accessories Supplied accessoriesOptional accessories Part Names and Functions Rotate indicatorSide View Top ViewRear View Terminals Using the Kensington LockFreeze button 41 For freezing images Inserting the Batteries Usable RangeEnsure that you do not drop it or expose it to Setup and Projection When connecting equipment other than a computer, see pagesEasy Start On the remote control To select the Input modeProjector Control Video Setup Setting Up the ProjectorSetting Up the Projector Standard Setup Front ProjectionFor XG-SV200X Signal Input Normal Mode Signal Input 169 ModeScreen Size and Projection Distance For XG-SV100W Signal Input Normal Mode Ceiling-Mount Setup Projection PRJ ModeTerminals on the Projector Connecting the Projector to Other EquipmentVideo Connecting the Projector to Other Equipment Controlling the Projector by a Computer Connecting the Power Cord When connecting to the LAN terminal using a LAN cableAC socket Power cord supplied To AC outlet Turning the Projector On/Off Turning the Projector OnOn-screen display confirmation message Shifting the Lens Image ProjectionPress H&V Shift on the remote control Using the Adjustment FeetRotate the adjustment feet to adjust the projected angle Enter button Adjustment buttons P/R/O/QAdjusting the Projected Image Size Adjusting the FocusPress Focus +/- on the remote control to adjust the focus Zoom buttons Focus buttonsPress Keystone on the projector or on the remote control Correcting Trapezoidal DistortionSelecting the Type of the Correction Geometric Adjustment Press Keystone on KeystoneSwitching the Input Mode Input listHDMI, Computer 1/2, S-VIDEO, Video buttons AV Mute button VOL +/- Volume buttons On-screen display Adjusting the VolumePress Resize Resize ModeFor XG-SV200X ButtonVIDEO/DTV Normal Full Native For XG-SV100WNormal Area Zoom Stretch About CopyrightsDisplaying and Setting the Break Timer Operating with the Remote ControlUsing the Spot Function Switching the Eco+Quiet ModeFreezing a Moving Image Selecting the Picture ModeConnecting with a USB cable Using the Remote Control as the Wireless Computer MousePicture menu Audio menu Menu ItemsSIG Signal adjustment SIG menu Screen adjustment SCR menuNetwork Net. menu Projector adjustment PRJ menuMenu Selections Adjustments Using the Menu ScreenPress Q or O and select Picture to adjust Press MenuPress P or R and select Bright to adjust To adjust the projected image while watching itPress O or Q to adjust the item selected Press Enter1Selecting the Picture Mode Picture Adjustment Picture MenuAdjusting the Image Menu operation nAdjusting the Color Temperature Adjusting the ColorsPicker Reducing Image Noise DNR S. color adjustment screenEco+Quiet Set DNR to Off in the following casesSpeaker Setting Audio Adjustment Audio MenuAudio Output Type Setting Adjusting the AudioAuto Sync Adjustment Signal Adjustment SIG MenuSignal Type Setting Resolution SettingSetting the Video Setup Setting the Video SystemChecking the Input Signal Selecting the Dynamic RangeSetting the Resize Mode Screen Adjustment SCR MenuSetting the Overscan Setting the On-screen DisplaySelecting a Startup and Background Image Closed CaptionReversing/Inverting Projected Images Selecting the On-screen4STANDBY Mode Auto Power Off FunctionAuto Restart Function 3COMPUTER2 SelectSetting/Changing the keycode 6Fan Mode Setting7System Lock Function This function changes the fan rotation speedKeylock Function Helpful Functions Set during Installation PRJ menuDLP LinkTM DLP LinkTM Invert0Memory Menu Rotate IndicatorChecking the Lamp Life Status Returning to the Default SettingsSetting a Password Setting a PasswordChanging the Password If you forget the passwordDhcp Client Setting Setting Up the Projector Network Environment Net. MenuTCP/IP Setting Returning to Default Settings NetworkYou can confirm the following items Confirming the Projector InformationViewing Stereoscopic 3D Images Precautions on Viewing Stereoscopic 3D ImagesEpilepsy To display 3D images, this projector requires Information on the 3D Projection FunctionPress 3D Mode Using 3D Viewing ModePress 3D Mode on the remote Projecting 3D imagesAppendix Cleaning the projector MaintenanceAbout the temperature warning indicator Maintenance IndicatorsAbnormally high Are high Lower than 95F +35ºC Regarding the Lamp LampReplacing the Lamp Remove the lamp unit cover Removing and Installing the Lamp UnitResetting the Lamp Timer Computer Compatibility ChartDTV 3D Supported SignalsAttaching the Ceiling-mount Rotating Module AN-SV100T Two points with the supplied Screws Attaching the Terminal Cover to the ModuleAttach the height-adjustment pole to the ceiling mount When installed with AN-TK201Attaching the Ceiling Mount to the Ceiling Attach the ceiling mount to CeilingAttach the ceiling mount to the ceiling When installed with AN-TK20222-26 Troubleshooting69, 70 Problem Check For Sharp Assistance XG-SV100W XG-SV200X SpecificationsDimensions Index
Related manuals
Manual 26 pages 56.08 Kb

XG-SV100W, XG-SV200X specifications

The Sharp XG-SV200X and XG-SV100W are two remarkable projectors that provide high-quality imaging technology, enabling users to deliver captivating presentations and immersive experiences in various settings. Both models are designed to meet the needs of business professionals, educators, and movie enthusiasts alike, owing to their superior features and performance.

The Sharp XG-SV200X stands out with its impressive brightness of 4000 ANSI lumens, making it suitable for use in well-lit environments. It employs a 3LCD technology, which ensures vivid color reproduction and high-resolution images with a native SVGA (800 x 600) resolution. This projector is particularly useful for businesses that require clear visuals during meetings and conferences. The XG-SV200X also supports a wide range of input options, including HDMI, VGA, and composite video, ensuring compatibility with various devices like laptops, Blu-ray players, and more.

On the other hand, the XG-SV100W is engineered to provide users with exceptional versatility and portability. With a brightness of 3100 ANSI lumens, this model is designed for both educational and corporate use. It features a native WXGA (1280 x 800) resolution, which facilitates crisp images and allows users to present high-definition presentations effortlessly. The projector's lightweight design enhances its portability, making it easy to transport from one location to another.

Both projectors incorporate advanced technologies such as optical lens shift, digital keystone correction, and a long lamp life of up to 5000 hours, offering users added convenience. The optical lens shift enables precise adjustments for projection without distortion, while digital keystone correction helps to maintain image integrity even when the projector is positioned at an angle. Additionally, the long lamp life minimizes maintenance costs and downtime, allowing users to focus on their content.

In terms of user-friendliness, both the XG-SV200X and XG-SV100W feature intuitive interfaces, allowing users to navigate their settings with ease. They are also equipped with built-in speakers that deliver adequate audio output, making them suitable for small to medium-sized rooms.

In conclusion, the Sharp XG-SV200X and XG-SV100W projectors are versatile tools that provide exceptional performance and image quality. Their advanced features, portability, and user-friendly design make them ideal choices for anyone looking to enhance their presentation experience. Whether in a classroom or a corporate boardroom, these projectors continue to impress with their reliability and quality.
Top Page Image Contents