Sharp XG-SV100W, XG-SV200X Removing and Installing the Lamp Unit, Remove the lamp unit cover

Page 77

Removing and Installing the Lamp Unit

Warning!

•Do not remove the lamp unit from the projector right after use. The lamp and parts around the lamp will be very hot and may cause burns or injury.

Optional

accessory

Lamp unit

AN-SV10LP

Info

•Do not touch the glass surface of the lamp unit or the inside of the projector.

•To avoid injury to yourself and damage to the lamp, make sure you carefully follow the steps below.

•Do not loosen other screws except for the lamp unit cover and lamp unit.

1 Press STANDBY/ON on the projector or STANDBY on the remote control to put the projector into Standby mode.

2 Disconnect the power cord.

•Unplug the power cord from the AC socket.

•Leave the lamp until it has fully cooled down (about 1 hour).

3Remove the lamp unit cover.

•Loosen the user service screw (1) that

secures the lamp unit cover. Remove the lamp unit cover (2).

STANDBY/ON button

AC socket

User service screw (for lamp unit cover)

Appendix

Image 77

Contents XG-SV100W XG-SV200X SetupModel No Serial No Iii Page Void the users authority to operate this equipment See bottom of projectorInformation Product Disposal For Future Reference Maintenance Troubleshooting IndexContents Selecting the Transmission Speed ReferencePower Sources CleaningAccessories Power-Cord ProtectionReplacement Parts Damage Requiring ServiceSafety Check OverloadingDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally Other connected equipment Using the projector in other countriesTemperature monitor function Setup Manual Optional accessories AccessoriesSupplied accessories Part Names and Functions Rotate indicatorSide View Top ViewRear View Terminals Using the Kensington LockFreeze button 41 For freezing images Ensure that you do not drop it or expose it to Inserting the BatteriesUsable Range Easy Start Setup and ProjectionWhen connecting equipment other than a computer, see pages Projector Control On the remote controlTo select the Input mode Video Setup Setting Up the ProjectorSetting Up the Projector Standard Setup Front ProjectionScreen Size and Projection Distance For XG-SV200X Signal Input Normal ModeSignal Input 169 Mode For XG-SV100W Signal Input Normal Mode Ceiling-Mount Setup Projection PRJ ModeTerminals on the Projector Connecting the Projector to Other EquipmentVideo Connecting the Projector to Other Equipment Controlling the Projector by a Computer AC socket Power cord supplied To AC outlet Connecting the Power CordWhen connecting to the LAN terminal using a LAN cable On-screen display conﬁrmation message Turning the Projector On/OffTurning the Projector On Shifting the Lens Image ProjectionPress H&V Shift on the remote control Using the Adjustment FeetRotate the adjustment feet to adjust the projected angle Enter button Adjustment buttons P/R/O/QAdjusting the Projected Image Size Adjusting the FocusPress Focus +/- on the remote control to adjust the focus Zoom buttons Focus buttonsSelecting the Type of the Correction Press Keystone on the projector or on the remote controlCorrecting Trapezoidal Distortion Geometric Adjustment Press Keystone on KeystoneHDMI, Computer 1/2, S-VIDEO, Video buttons Switching the Input ModeInput list AV Mute button VOL +/- Volume buttons On-screen display Adjusting the VolumePress Resize Resize ModeFor XG-SV200X ButtonVIDEO/DTV Normal Full Native For XG-SV100WNormal Area Zoom Stretch About CopyrightsDisplaying and Setting the Break Timer Operating with the Remote ControlUsing the Spot Function Switching the Eco+Quiet ModeFreezing a Moving Image Selecting the Picture ModeConnecting with a USB cable Using the Remote Control as the Wireless Computer MousePicture menu Audio menu Menu ItemsSIG Signal adjustment SIG menu Screen adjustment SCR menuNetwork Net. menu Projector adjustment PRJ menuMenu Selections Adjustments Using the Menu ScreenPress Q or O and select Picture to adjust Press MenuPress P or R and select Bright to adjust To adjust the projected image while watching itPress O or Q to adjust the item selected Press Enter1Selecting the Picture Mode Picture Adjustment Picture MenuAdjusting the Image Menu operation nPicker Adjusting the Color TemperatureAdjusting the Colors Reducing Image Noise DNR S. color adjustment screenEco+Quiet Set DNR to Off in the following casesSpeaker Setting Audio Adjustment Audio MenuAudio Output Type Setting Adjusting the AudioAuto Sync Adjustment Signal Adjustment SIG MenuSignal Type Setting Resolution SettingSetting the Video Setup Setting the Video SystemChecking the Input Signal Selecting the Dynamic RangeSetting the Resize Mode Screen Adjustment SCR MenuSetting the Overscan Setting the On-screen DisplaySelecting a Startup and Background Image Closed CaptionReversing/Inverting Projected Images Selecting the On-screen4STANDBY Mode Auto Power Off FunctionAuto Restart Function 3COMPUTER2 SelectSetting/Changing the keycode 6Fan Mode Setting7System Lock Function This function changes the fan rotation speedKeylock Function Helpful Functions Set during Installation PRJ menuDLP LinkTM DLP LinkTM Invert0Memory Menu Rotate IndicatorChecking the Lamp Life Status Returning to the Default SettingsSetting a Password Setting a PasswordChanging the Password If you forget the passwordDhcp Client Setting Setting Up the Projector Network Environment Net. MenuTCP/IP Setting Returning to Default Settings NetworkYou can conﬁrm the following items Conﬁrming the Projector InformationViewing Stereoscopic 3D Images Precautions on Viewing Stereoscopic 3D ImagesEpilepsy To display 3D images, this projector requires Information on the 3D Projection FunctionPress 3D Mode Using 3D Viewing ModePress 3D Mode on the remote Projecting 3D imagesAppendix Cleaning the projector Maintenance About the temperature warning indicator Maintenance IndicatorsAbnormally high Are high Lower than 95F +35ºC Replacing the Lamp Regarding the LampLamp Remove the lamp unit cover Removing and Installing the Lamp UnitResetting the Lamp Timer Computer Compatibility ChartDTV 3D Supported SignalsAttaching the Ceiling-mount Rotating Module AN-SV100T Two points with the supplied Screws Attaching the Terminal Cover to the ModuleAttach the height-adjustment pole to the ceiling mount When installed with AN-TK201Attaching the Ceiling Mount to the Ceiling Attach the ceiling mount to CeilingAttach the ceiling mount to the ceiling When installed with AN-TK20222-26 Troubleshooting69, 70 Problem Check For Sharp Assistance XG-SV100W XG-SV200X SpeciﬁcationsDimensions Index

Related manuals

Manual 26 pages 56.08 Kb