Sharp XG-SV100W, XG-SV200X 6Fan Mode Setting, 7System Lock Function, Setting/Changing the keycode

6Fan Mode Setting

This function changes the fan rotation speed.

Selectable	Description
items
Normal	Suitable for normal environments.
High	Select this when using the
	projector at altitudes of
	approximately 1,500 meters (4,900
	feet) or more.

When “Fan Mode” is set to “High”, the fan rotation speeds up, and the fan noise becomes louder.

7System Lock Function

This function prevents unauthorized use of the projector. Once this function is activated, users must enter the correct keycode each time the projector is turned on. We suggest you record the keycode in a safe place where only authorized users have access.

Info

•If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 84). Even if the product warranty is valid, the keycode reset will incur a charge.

a Setting/Changing the keycode

1 Select “System Lock”, then press

ENTER or Q.

2Select “Next”, then press ENTER.

•The screen for entering the keycode appears.

Menu operation n Page 46

3 Press the 4 buttons on the remote control or on the projector to enter the preset keycode in “Old Code”.

•When setting the keycode for the fi rst time, press R on the projector for four times.

	PRJ
Setting the System Lock
Old Code		–	–	–	–
New Code		– – – –
Reconfirm		– – – –

Note

•If you input a wrong keycode, the cursor returns to the fi rst point of the “Old Code”.

•The preset keycode is 4 R buttons on the projector. When you press the R button four times, the keycord input

screen disappears.

4 Press the 4 buttons on the remote control or on the projector to enter the new keycode in “New Code”.

Note

• You cannot use the following buttons
	for keycode: STANDBY/ON, ON,
	STANDBY, ENTER, L-CLICK/EFFECT,
	R-CLICK/RETURN, MENU,
	ECO+QUIET, BREAK TIMER, ZOOM,
	FOCUS, H&V SHIFT, ROTATE, LENS,
	MEMORY MENU and MEMORY (1-8)
• System lock function recognizes
	each button on the remote control
	or on the projector as an individual
	button, even if they share the
	same button name. If you used the				Useful Features
	buttons on the projector in setting
	your keycode, the keycode cannot
	be canceled with the remote
	control.
		PRJ
Setting the System Lock
	Old Code	* * * *
	New Code		–	– – –
	Reconfirm		– – – –

57