Image Projection (Continued)
Switching the Input Mode
Select the appropriate input mode for the connected equipment.
Press HDMI, COMPUTER 1/2,
■When you select the input mode with INPUT R/P on the projector:
•When R/P is pressed, the Input list appears. While the Input list is displayed, follow the procedure below to switch the input mode.
INPUT list
INPUT | Audio |
|
|
|
|
1 COMPUTER1 |
|
2 MONITOR OUT |
|
HHDMI
SS-VIDEO
VVIDEO
HDMI, COMPUTER 1/2, S-VIDEO, VIDEO buttons
–Press R/P to select the desired input mode and then press ENTER.
•If ENTER is not pressed, the projector switches to the selected input mode in a few seconds.
Note
•When no signal is received, “NO SIGNAL” will be displayed. When
34