Sharp XG-SV100W, XG-SV200X Turning the Projector On/Off, On-screen display confirmation message

Page 31

Turning the Projector On/Off

Turning the Projector On

Note that the connections to external equipment and power outlet should be done before performing the operations written below. (See pages 22 to 26.)

Press STANDBY/ON on the projector or ON on the remote control.

•The power indicator illuminates green.

•After the lamp indicator illuminates, the projector is ready to start operation.

Note

•About the Lamp Indicator

The lamp indicator illuminates to indicate the status of the lamp.

Green: The lamp is on.

Blinking in green: The lamp is warming up.

Red: The lamp is shut down abnormally or the lamp should be replaced.

•When switching on the projector, a slight

fl ickering of the image may be experienced within the fi rst minute after the lamp has been illuminated. This is normal operation as the lamp's control circuitry is stabilising the lamp output characteristics. It should not be regarded as faulty operation.

•If the projector is put into Standby mode and immediately turned on again, the lamp may take some time to start projection.

•When System Lock is set, the keycode input box appears. To cancel the keycode setting, input the keycode that you have already set. See page 57 for details.

Info

•When “Auto Restart” is set to “On”:

If the power cord is unplugged from the outlet or the breaker switch is turned off when the projector is on, then the projector automatically turns on when the power cord is plugged into the AC outlet or the breaker switch is turned on. (See page 56.)

•English is the factory default language. If you want to change the on-screen display to another language, change the language according to the procedure on page 55.

STANDBY/ON button

Power indicator

Lamp indicator

STANDBY button

ON button

Basic Operation

On-screen display (confirmation message)

Turning the Power Off (Putting the Projector into Standby Mode)

Press STANDBY/ON on the projector or STANDBY on the remote control, then press that button again while the confirmation message is displayed, to put the projector into Standby mode.

• The projector cannot be turned on while cooling.

Info

•Direct Power Off function:

You can unplug the power cord from the AC outlet even if the cooling fan is still running.

27

Page 30 Page 32
Image 31
Page 30 Page 32
Contents XG-SV100W XG-SV200X SetupModel No Serial No Iii Page Void the users authority to operate this equipment See bottom of projectorInformation Product Disposal For Future Reference Maintenance Troubleshooting IndexContents Selecting the Transmission Speed ReferencePower-Cord Protection CleaningPower Sources AccessoriesOverloading Damage Requiring ServiceReplacement Parts Safety CheckRest your eyes occasionally Avoid locations with extremes of temperatureDo not block the exhaust and intake vents Temperature monitor function Using the projector in other countriesOther connected equipment Setup Manual Supplied accessories AccessoriesOptional accessories Top View Rotate indicatorPart Names and Functions Side ViewRear View Terminals Using the Kensington LockFreeze button 41 For freezing images Usable Range Inserting the BatteriesEnsure that you do not drop it or expose it to When connecting equipment other than a computer, see pages Setup and ProjectionEasy Start To select the Input mode On the remote controlProjector Control Standard Setup Front Projection Setting Up the ProjectorVideo Setup Setting Up the ProjectorSignal Input 169 Mode For XG-SV200X Signal Input Normal ModeScreen Size and Projection Distance For XG-SV100W Signal Input Normal Mode Ceiling-Mount Setup Projection PRJ ModeTerminals on the Projector Connecting the Projector to Other EquipmentVideo Connecting the Projector to Other Equipment Controlling the Projector by a Computer When connecting to the LAN terminal using a LAN cable Connecting the Power CordAC socket Power cord supplied To AC outlet Turning the Projector On Turning the Projector On/OffOn-screen display confirmation message Shifting the Lens Image ProjectionEnter button Adjustment buttons P/R/O/Q Using the Adjustment FeetPress H&V Shift on the remote control Rotate the adjustment feet to adjust the projected angleZoom buttons Focus buttons Adjusting the FocusAdjusting the Projected Image Size Press Focus +/- on the remote control to adjust the focusCorrecting Trapezoidal Distortion Press Keystone on the projector or on the remote controlSelecting the Type of the Correction Geometric Adjustment Press Keystone on KeystoneInput list Switching the Input ModeHDMI, Computer 1/2, S-VIDEO, Video buttons AV Mute button VOL +/- Volume buttons On-screen display Adjusting the VolumeButton Resize ModePress Resize For XG-SV200XVIDEO/DTV Normal Full Native For XG-SV100WNormal Area Zoom Stretch About CopyrightsSwitching the Eco+Quiet Mode Operating with the Remote ControlDisplaying and Setting the Break Timer Using the Spot FunctionFreezing a Moving Image Selecting the Picture ModeConnecting with a USB cable Using the Remote Control as the Wireless Computer MousePicture menu Audio menu Menu ItemsSIG Signal adjustment SIG menu Screen adjustment SCR menuNetwork Net. menu Projector adjustment PRJ menuPress Menu Using the Menu ScreenMenu Selections Adjustments Press Q or O and select Picture to adjustPress Enter To adjust the projected image while watching itPress P or R and select Bright to adjust Press O or Q to adjust the item selectedMenu operation n Picture Adjustment Picture Menu1Selecting the Picture Mode Adjusting the ImageAdjusting the Colors Adjusting the Color TemperaturePicker Set DNR to Off in the following cases S. color adjustment screenReducing Image Noise DNR Eco+QuietAdjusting the Audio Audio Adjustment Audio MenuSpeaker Setting Audio Output Type SettingResolution Setting Signal Adjustment SIG MenuAuto Sync Adjustment Signal Type SettingSelecting the Dynamic Range Setting the Video SystemSetting the Video Setup Checking the Input SignalSetting the On-screen Display Screen Adjustment SCR MenuSetting the Resize Mode Setting the OverscanSelecting the On-screen Closed CaptionSelecting a Startup and Background Image Reversing/Inverting Projected Images3COMPUTER2 Select Auto Power Off Function4STANDBY Mode Auto Restart FunctionThis function changes the fan rotation speed 6Fan Mode SettingSetting/Changing the keycode 7System Lock FunctionDLP LinkTM Invert Helpful Functions Set during Installation PRJ menuKeylock Function DLP LinkTM0Memory Menu Rotate IndicatorChecking the Lamp Life Status Returning to the Default SettingsIf you forget the password Setting a PasswordSetting a Password Changing the PasswordReturning to Default Settings Network Setting Up the Projector Network Environment Net. MenuDhcp Client Setting TCP/IP SettingYou can confirm the following items Confirming the Projector InformationViewing Stereoscopic 3D Images Precautions on Viewing Stereoscopic 3D ImagesEpilepsy To display 3D images, this projector requires Information on the 3D Projection FunctionProjecting 3D images Using 3D Viewing ModePress 3D Mode Press 3D Mode on the remoteAppendix Cleaning the projector MaintenanceAbout the temperature warning indicator Maintenance IndicatorsAbnormally high Are high Lower than 95F +35ºC Lamp Regarding the LampReplacing the Lamp Remove the lamp unit cover Removing and Installing the Lamp UnitResetting the Lamp Timer Computer Compatibility ChartDTV 3D Supported SignalsAttaching the Ceiling-mount Rotating Module AN-SV100T Two points with the supplied Screws Attaching the Terminal Cover to the ModuleAttach the ceiling mount to Ceiling When installed with AN-TK201Attach the height-adjustment pole to the ceiling mount Attaching the Ceiling Mount to the CeilingAttach the ceiling mount to the ceiling When installed with AN-TK20222-26 Troubleshooting69, 70 Problem Check For Sharp Assistance XG-SV100W XG-SV200X SpecificationsDimensions Index
Related manuals
Manual 26 pages 56.08 Kb

XG-SV100W, XG-SV200X specifications

The Sharp XG-SV200X and XG-SV100W are two remarkable projectors that provide high-quality imaging technology, enabling users to deliver captivating presentations and immersive experiences in various settings. Both models are designed to meet the needs of business professionals, educators, and movie enthusiasts alike, owing to their superior features and performance.

The Sharp XG-SV200X stands out with its impressive brightness of 4000 ANSI lumens, making it suitable for use in well-lit environments. It employs a 3LCD technology, which ensures vivid color reproduction and high-resolution images with a native SVGA (800 x 600) resolution. This projector is particularly useful for businesses that require clear visuals during meetings and conferences. The XG-SV200X also supports a wide range of input options, including HDMI, VGA, and composite video, ensuring compatibility with various devices like laptops, Blu-ray players, and more.

On the other hand, the XG-SV100W is engineered to provide users with exceptional versatility and portability. With a brightness of 3100 ANSI lumens, this model is designed for both educational and corporate use. It features a native WXGA (1280 x 800) resolution, which facilitates crisp images and allows users to present high-definition presentations effortlessly. The projector's lightweight design enhances its portability, making it easy to transport from one location to another.

Both projectors incorporate advanced technologies such as optical lens shift, digital keystone correction, and a long lamp life of up to 5000 hours, offering users added convenience. The optical lens shift enables precise adjustments for projection without distortion, while digital keystone correction helps to maintain image integrity even when the projector is positioned at an angle. Additionally, the long lamp life minimizes maintenance costs and downtime, allowing users to focus on their content.

In terms of user-friendliness, both the XG-SV200X and XG-SV100W feature intuitive interfaces, allowing users to navigate their settings with ease. They are also equipped with built-in speakers that deliver adequate audio output, making them suitable for small to medium-sized rooms.

In conclusion, the Sharp XG-SV200X and XG-SV100W projectors are versatile tools that provide exceptional performance and image quality. Their advanced features, portability, and user-friendly design make them ideal choices for anyone looking to enhance their presentation experience. Whether in a classroom or a corporate boardroom, these projectors continue to impress with their reliability and quality.
Top Page Image Contents