Runco VX-33D operation manual Primary Lens, Adjustments, Focus, Zoom, Lens Shift

Installation

3.10	To access the motorized lens controls, use the FOCUS, ZOOM and LENS buttons on the
Primary Lens	VX-33d remote control unit (described on page 14).
Adjustments	Alternatively, select Display Device from the Service Menu. Select Configure, then Lens
	from the Display Device menu. The Lens menu gives you a great deal of control over the
	picture size, position and focus:
Focus ➤	To focus the projected image, use the cursor buttons to highlight “In” or “Out.” Then,
	press and hold the ENTER button on the remote control.
Zoom ➤	To make the picture smaller (zoom out), use the cursor buttons to highlight the minus sign
	(-). Then, press and hold the ENTER button on the remote control.
	To enlarge the picture (zoom in), use the cursor buttons to highlight the plus sign (+).
	Then, press and hold the ENTER button on the remote control.
Vertical and Horizontal ➤	To change the projected image position, use the cursor buttons to highlight “Left,”
Lens Shift	“Right,” “Up” or “Down” in the Lens menu. Then, press and hold the ENTER button to
	shift the image in that direction.

40 Runco VX-33d Installation/Operation Manual