Runco VX-33D operation manual Introduction, About This Manual

1. Introduction

This Owner’s Manual describes how to install, set up and operate the Runco VX-33d DLP	1.1
Projector and DHD Controller. Throughout this manual, the Runco VX-33d DLP Projector	About This Manual
and DHD Controller are referred to collectively as the “VX-33d.”
Runco has prepared this manual to help home theater installers and end users get the	Target Audience
most out of the VX-33d.
Runco has made every effort to ensure that this manual is accurate as of the date it was
printed. However, because of ongoing product improvements and customer feedback, it
may require updating from time to time. You can always find the latest version of this and
other Runco product manuals on-line, at www.runco.com.
Runco welcomes your comments about this manual. Send them to info@runco.com.	If You Have Comments
	About This Manual...
Text Conventions: The following conventions are used in this manual, in order to clarify	Textual and Graphic
the information and instructions provided:	Conventions

•Remote and built-in keypad button identifiers are set in upper-case bold type; for example, “Press EXIT to return to the previous menu.”

•Computer input (commands you type) and output (responses that appear on-screen) is shown in monospace (fixed-width) type; for example: “To change the aspect ratio to Letterbox, type SAR 2<Enter>.”

•All keys with functional names are initial-capped, set in bold type and enclosed in angle brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc> and <Tab>.

•<Enter> indicates that you may press either the RETURN or ENTER key on your keyboard if it has both keys.

In addition to these conventions, underlining, boldface and/or italics are occasionally used to highlight important information, as in this example:

A carriage return must be used after each command or string.

Note

Runco VX-33d Installation/Operation Manual 1