Runco VX-33D operation manual Picture, Remote Aspect Ratio Control Description Key

Operation

Table 4-1. Aspect Ratio Settings (continued)

	Remote
Aspect Ratio	Control		Description
	Key
Cinema	CINEMA			Select Cinema to view 2.35
				source material in its native
				aspect ratio.
				With a 16:9 screen and a
				non-CineWide projector (no
		2.35:1 Image on		anamorphic lens), the upper and
				lower portions of the screen are
		16:9 Screen
		(Cinema aspect ratio / no CineWide)		masked, but the geometry of the
				active image area is unchanged.
				With a 2.35:1 screen and a
		2.35:1 Image on		CineWide-equipped projector,
				the DHD Controller scales the
		2.35:1 Screen
		(Cinema aspect ratio / CineWide)		2.35:1 image so that the active
				image area fills the 16:9 chip
				surface, eliminating the black
				bars. The secondary,
				anamorphic lens then restores
				the proper geometry to the
				2.35:1 image.
Virtual Cinema	VCINE			A 16:9 image is scaled
				NON-linearly (more on the sides
		16:9 IImage on		than in the center) to fit a 2.35:1
		22..35:1 Screen		screen.

Virtual Cinema is available only on the VX-33d/CineWide.

16:9 Image on

2.35:1 Screen with

Virtual Cinema

Use the controls in the Picture Menu to calibrate your VX-33d for optimum picture quality.

The VX-33d has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from Runco video display devices. Accordingly, Runco recommends that setup and calibration be performed by an ISF certified installation technician.

All signal types require separate processing. Therefore, you need to calibrate each DHD Controller input separately.

Picture

Picture

Brightness

Contrast

Color

Tint

Sharpness

Runco VX-33d Installation/Operation Manual 51