Runco VX-2000d manual Service, Input Names Restore Composite Video Component SD

Page 61

Operation

•Runco/ISF Logo Splash Screen Timers: When you turn on the VX-2000d, it projects a welcome screen with the Runco logo followed by one with the ISF logo. Select Splash Timer from the Splash Configure menu to set the amount of time that these two images appear. The range is from 2 to 60 seconds, in one-second increments.

Use the up or down cursor button to select a timer value to adjust. Use the right or left cursor button to change the timer value. Press MENU when you have finished configuring both timers.

OSD Position: Select OSD Position, press ENTER and use the arrow buttons to change the size and position of the OSD controls.

Use the Service menu to access advanced projector configuration settings. This menu should be used by ISF-certified technicians only.

You must enter a passcode to access the Service menu.

Note

Test Video: Select Test Video from the Service Menu to access the internal test patterns on the VX-2000d. Four patterns are available, consisting of white/gray or colored bars.

Press MENU to exit test pattern mode.

Service

Service

Test Video

Input Names

Remote Control

Analog Out Mode

Display Device

HD Format

Triggers

Miscellaneous

System Reset

Restore Saved Settings

Input Names: You can give each DHD Controller input a descriptive name. For example, you may want to change the default input name to the type of source component connected to it: “VCR,” “DVD,” “Laptop” et cetera. Composite, S-Video and Component SD input names can be up to 12 characters long; the others can be up to eight characters long.

To edit an input name, select Input Names from the Service menu. Press or to select an input and press ENTER. Use the or buttons to change a character; press or to select a character to change. When you have finished editing the input name, press MENU.

To restore the default input name, press repeatedly to highlight that input name in the “Restore” column. Then, press ENTER.

To save input names so that they can be restored after a System Reset (described on page 52), press repeatedly to highlight “Save.” Then, press ENTER.

The button takes you from top to bottom in the left column, then

Note from top to bottom in the right column. To highlight “Save,” scroll through both columns.

Input Names

 

 

Restore

 

 

Composite

Composite

 

 

S Video 1

S Video 1

S Video 2

S Video 2

Component SD

Component SD

HD/RGB 1

HD/RGB 1

HD/RGB 2

HD/RGB 2

HDMI 1

HDMI 1

HDMI 2

HDMI 2

Save

 

 

 

Runco VX-2000d Owner’s Operating Manual

49

Page 60 Page 62
Image 61
Page 60 Page 62
Contents VX-2000d Page For Projectors, Video Processors and Controllers TWO Year Limited WarrantyEffective Warranty Date Runco INTERNATIONAL, INC Safety Precautions Table of Contents Operation On-Screen Menus for 1080i Digital or 1080p Signals Table of Contents List of Figures List of Figures Xii About This Manual IntroductionCertain features Using This ManualSignificance. They also provide supplemental information Degrade performance or cause a malfunctionFormat screen Description, Features and BenefitsOptional Accessories VX-2000d at a Glance Controls and FunctionsVertical Lens Shift RS-232C Input RJ-11 female connector Wired IR 3.5-mm, mini phono jackVX-2000d Rear Panel More information about aspect ratios, refer to Table DHD Controller Front PanelEnter Button DHD Controller Rear Panel Component Video RCA connectorsOutputs 1. Hdmi OUT Inputs 2. Hdmi 1 / Hdmi 2 DigitalVolt 750 mA Trigger Outputs Video 1 / S-VIDEOComLink RS-232 Output DHD Controller/VX-2000d Remote Control VX-2000d Remote Control UnitCursor Buttons On / OFFMenu button see below to exit the menu VideoAspect Ratio Selection Buttons Memory Preset Buttons16 9 Letbox LetterboxVX-2000d Built-In Keypad Only trained service personnel should use the built-inNot used Controls and Functions Remote Control InstallationBattery Installation OperationOther surfaces Installation specialist Quick SetupStep Procedure For Details, Refer to Projector calibration Analog 1080i Lower-resolution signalsInstallation Type InstallationConsiderations Ambient LightThrow Distance Floor Installation Ceiling InstallationVertical and Horizontal PositionOther Considerations Folded OpticsVX-2000d MountingConnections to the VX-2000d and DHD Controller You Cannot connect signal sources directly to the VX-2000dComponents to the DHD Connecting SourceController Hdmi Connections See FigureDigital DTV RGB or Component Video Connections Digital DTV RGB or Component Video Connections See FigurePersonal Computer Analog Computer RGB Connections See FigureDVD Player, VCR Satellite Receiver Laser Disc etc Composite/S-Video/Component Video Connections See FigureConnecting 12-Volt Connecting a PC orAutomation System to DHD ControllerBuilt-in IR sensor on the DHD Controller is disabled Connecting an External IR Receiver to the DHD ControllerAdjusting the Picture Orientation Turning on the PowerConnecting to AC Power You must enter a passcode to access the Service menuFocus and Zoom Primary Lens AdjustmentsVertical Lens Shift It is extremely important that the primary lens is properly Installing and Adjusting the CineWide Anamorphic LensAdjusting the Lens Height Y Installation Operation Service ISF PresetsInput Source Aspect RatioInput Source Main MenuAspect Ratio Aspect Ratio Description Aspect Ratio SettingsPicture Brightness Contrast Color Tint Sharpness PictureTypical Pluge Pattern for Adjusting Brightness Gray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Input Position Left/Right Up/Down Width Height Overscan Input PositionISF Presets ISF Night ISF Day Custom Save Factory Default ISF PresetsInformation Serial Num Hardware Firmware 0100.061A Date Apr 30Low-lights Offset provides finer adjustment You must enter a passcode to access the Calibration menuCalibration Gain/Offset Refer to ISF Night Display Color, above Input Names Restore Composite Video Component SD ServiceExit Use this control to fine-tune the image geometry on a ADC Bandwidth Auto YPbPr Input ResolutionHD/RGB 1 and HD/RGB 2 Color Space Select Auto, RGB or YUV AutoOperation On-Screen Menus for 1080i Digital or 1080p Signals Runco Video Language Picture AdjustDAY Mpeg NR Picture Adjust AdvancedEffects of Primary Color Hue Adjustments White Balance White BalanceOptions Image Shift and Subtitle can only be adjusted for certainBelow to Off, the LED function is automatically set to On Lamp Hours read-onlyRefer to Lamp Hours onRefer to page 60 is automatically set to On OSD Language setting Orientation Refer to Adjusting the Picture Orientation onLamp Replacement Maintenance and TroubleshootingSymptom Possible Causes Solution Troubleshooting TipsTroubleshooting Chart Maintenance and Troubleshooting Serial Command Syntax RS-232 Connection and Port ConfigurationCommand Value Description Min/max Stored? Power On/Off CommandsAspect Ratio Commands Brightness Iheight Bkgnd Enter key Command Parameter min/max Value Stored? DescriptionVX-2000d Specifications SpecificationsIndustry-Standard Specifications Home Theater Calibration SpecificationsPower Requirements DimensionsDHD Controller Specifications VX-2000d/CineWide Dimensions VX-2000d DimensionsPage Runco CL-810 Owner’s Operating Manual RUMA-009330 Rev 05-25-07
Related manuals
Manual 88 pages 1.71 Kb

VX-2000d specifications

The Runco VX-2000d is a premium home theater projector that combines cutting-edge technology with a commitment to delivering extraordinary image quality. Renowned among enthusiasts for its exceptional performance, the VX-2000d caters to both the casual viewer and the most discerning cinephile, making it a standout option in the world of home entertainment.

One of the primary features of the Runco VX-2000d is its native 1080p resolution, which ensures that images are crisp, detailed, and vibrant. With a resolution of 1920 x 1080 pixels, this projector capitalizes on High Definition content, enabling viewers to experience movies and shows as the directors intended. Coupled with high brightness levels and a remarkable contrast ratio, the VX-2000d exhibits deep blacks and brilliant colors, enhancing the overall viewing experience.

The VX-2000d incorporates advanced DLP (Digital Light Processing) technology that provides remarkable color accuracy and consistency across a variety of content. The use of the latest imaging chips and sophisticated optics creates lifelike imagery that draws viewers into the action. Additionally, this projector supports a wide color gamut, allowing it to reproduce a broader range of colors for enhanced realism.

Another highlight of the Runco VX-2000d is its sophisticated lens system. The projector features a high-quality glass lens that minimizes optical distortion while ensuring sharp focus across the entire image. Its motorized lens shift, zoom, and focus functionalities allow for easy installation and flexibility in positioning the projector within various home theater setups.

The VX-2000d also supports various video formats, including 24p film and 1080p/60, making it versatile for different types of content. Also, with its built-in proprietary video processing technology, the projector upscales standard-definition and high-definition content to optimized viewing experiences.

Furthermore, the Runco VX-2000d is equipped with a range of connectivity options, including HDMI, Component, and VGA inputs, ensuring compatibility with numerous devices such as Blu-ray players, gaming consoles, and streaming devices.

With its combination of excellent build quality, robust performance, and impressive features, the Runco VX-2000d remains a top choice for enthusiasts seeking an unparalleled home theater experience. Whether enjoying action-packed films or serene nature documentaries, this projector immerses viewers in a cinematic journey that captivates the senses.
Top Page Image Contents