Runco VX-2000d manual White Balance

Page 71

MPEG NR: Select MPEG NR from the Picture Adjust menu to reduce or eliminate so-called “mosquito noise” in MPEG-compressed video signals (digital broadcasts or DVDs). Set it to Off, 1, 2 or 3, as needed to minimize distortion around the edges of moving objects, moving artifacts around edges and/or blotchy noise patterns superimposed over the objects.

Sharpness Enhancement: select Sharpness Enhancement from the Advanced Picture Adjust menu to apply edge enhancement to images, giving the impression of added depth. Set it to Off, 1, 2, or 3 as desired.

Automatic Contrast: The VX-2000d can dynamically adjust the contrast (white level) according to the color content in the signal, to produce the best picture quality. Select Automatic Contrast from the Picture Adjust menu to activate this feature. Set it to Off, 1, 2, or 3 as desired. Selecting “3” results in a higher average white level than the other settings.

Reset to Defaults: To reset all picture quality settings for the current input to their factory-default values, select Reset to Defaults from the Picture menu.

The VX-2000d provides nine adjustable white balance parameters, allowing precise adjustment of the intensity of the red, blue and green color components in the dark areas (Offset), light areas (Gain) and “mid-tone” areas (Gamma).

You can adjust these parameters as needed and store them in any of six presets (memory locations). The selected white balance preset can, in turn, be associated with a “Picture Memory“ preset (refer to White Balance on page 56). The most logical way to do this is to associate a white balance preset with the picture memory preset of the same name; however, you can associate a white balance preset with any picture memory preset.

Mem. Select: To select and edit a white balance preset, select Mem. Select from the White Balance menu.

Red Gamma/Green Gamma/Blue Gamma: Refer to ISF Night - Display Color on page 47.

Red Gain/Green Gain/Blue Gain: Refer to ISF Night - Display Color on page 47.

Red Offset/Green Offset/Blue Offset: Refer to ISF Night - Display Color on page 47.

Reset to Defaults: To reset the Gamma, Gain and Offset settings for the currently-selected white balance preset to their factory-default values, select Reset to Defaults from the White Balance menu. Then, select Yes to confirm the reset.

White Balance

White Balance

Mem. Select

4

 

 

Gamma

 

Red Gamma

0

Green Gamma

0

Blue Gamma

0

Gain

 

Red Gain

0

Green Gain

0

Blue Gain

0

Offset

 

Red Offset

0

Green Offset

0

Blue Offset

0

Reset to Defaults

 

 

 

Runco VX-2000d Owner’s Operating Manual

59

Page 70 Page 72
Image 71
Page 70 Page 72
Contents VX-2000d Page For Projectors, Video Processors and Controllers TWO Year Limited WarrantyEffective Warranty Date Runco INTERNATIONAL, INC Safety Precautions Table of Contents Operation On-Screen Menus for 1080i Digital or 1080p Signals Table of Contents List of Figures List of Figures Xii About This Manual IntroductionDegrade performance or cause a malfunction Using This ManualCertain features Significance. They also provide supplemental informationFormat screen Description, Features and BenefitsOptional Accessories VX-2000d at a Glance Controls and FunctionsVertical Lens Shift VX-2000d Rear Panel Wired IR 3.5-mm, mini phono jackRS-232C Input RJ-11 female connector More information about aspect ratios, refer to Table DHD Controller Front PanelEnter Button Inputs 2. Hdmi 1 / Hdmi 2 Digital Component Video RCA connectorsDHD Controller Rear Panel Outputs 1. Hdmi OUTComLink RS-232 Output Video 1 / S-VIDEOVolt 750 mA Trigger Outputs DHD Controller/VX-2000d Remote Control VX-2000d Remote Control UnitVideo On / OFFCursor Buttons Menu button see below to exit the menuLetbox Letterbox Memory Preset ButtonsAspect Ratio Selection Buttons 16 9Not used Only trained service personnel should use the built-inVX-2000d Built-In Keypad Controls and Functions Operation InstallationRemote Control Battery InstallationOther surfaces Projector calibration Analog 1080i Lower-resolution signals Quick SetupInstallation specialist Step Procedure For Details, Refer toAmbient Light InstallationInstallation Type ConsiderationsThrow Distance Position Ceiling InstallationFloor Installation Vertical and HorizontalOther Considerations Folded OpticsVX-2000d MountingConnections to the VX-2000d and DHD Controller You Cannot connect signal sources directly to the VX-2000dHdmi Connections See Figure Connecting SourceComponents to the DHD ControllerDigital DTV RGB or Component Video Connections Digital DTV RGB or Component Video Connections See FigurePersonal Computer Analog Computer RGB Connections See FigureDVD Player, VCR Satellite Receiver Laser Disc etc Composite/S-Video/Component Video Connections See FigureDHD Controller Connecting a PC orConnecting 12-Volt Automation System toBuilt-in IR sensor on the DHD Controller is disabled Connecting an External IR Receiver to the DHD ControllerYou must enter a passcode to access the Service menu Turning on the PowerAdjusting the Picture Orientation Connecting to AC PowerVertical Lens Shift Primary Lens AdjustmentsFocus and Zoom It is extremely important that the primary lens is properly Installing and Adjusting the CineWide Anamorphic LensAdjusting the Lens Height Y Installation Operation Aspect Ratio ISF PresetsService Input SourceAspect Ratio Main MenuInput Source Aspect Ratio Description Aspect Ratio SettingsPicture Brightness Contrast Color Tint Sharpness PictureTypical Pluge Pattern for Adjusting Brightness Gray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Input Position Left/Right Up/Down Width Height Overscan Input PositionSerial Num Hardware Firmware 0100.061A Date Apr 30 ISF PresetsISF Presets ISF Night ISF Day Custom Save Factory Default InformationCalibration You must enter a passcode to access the Calibration menuLow-lights Offset provides finer adjustment Gain/Offset Refer to ISF Night Display Color, above Input Names Restore Composite Video Component SD ServiceExit Auto ADC Bandwidth Auto YPbPr Input ResolutionUse this control to fine-tune the image geometry on a HD/RGB 1 and HD/RGB 2 Color Space Select Auto, RGB or YUVOperation On-Screen Menus for 1080i Digital or 1080p Signals Runco Video Language Picture AdjustDAY Mpeg NR Picture Adjust AdvancedEffects of Primary Color Hue Adjustments White Balance White BalanceLamp Hours read-onlyRefer to Lamp Hours on Image Shift and Subtitle can only be adjusted for certainOptions Below to Off, the LED function is automatically set to OnRefer to page 60 is automatically set to On OSD Language setting Orientation Refer to Adjusting the Picture Orientation onLamp Replacement Maintenance and TroubleshootingSymptom Possible Causes Solution Troubleshooting TipsTroubleshooting Chart Maintenance and Troubleshooting Value Description Min/max Stored? Power On/Off Commands RS-232 Connection and Port ConfigurationSerial Command Syntax CommandAspect Ratio Commands Brightness Iheight Bkgnd Enter key Command Parameter min/max Value Stored? DescriptionVX-2000d Specifications SpecificationsDimensions Home Theater Calibration SpecificationsIndustry-Standard Specifications Power RequirementsDHD Controller Specifications VX-2000d/CineWide Dimensions VX-2000d DimensionsPage Runco CL-810 Owner’s Operating Manual RUMA-009330 Rev 05-25-07
Related manuals
Manual 88 pages 1.71 Kb

VX-2000d specifications

The Runco VX-2000d is a premium home theater projector that combines cutting-edge technology with a commitment to delivering extraordinary image quality. Renowned among enthusiasts for its exceptional performance, the VX-2000d caters to both the casual viewer and the most discerning cinephile, making it a standout option in the world of home entertainment.

One of the primary features of the Runco VX-2000d is its native 1080p resolution, which ensures that images are crisp, detailed, and vibrant. With a resolution of 1920 x 1080 pixels, this projector capitalizes on High Definition content, enabling viewers to experience movies and shows as the directors intended. Coupled with high brightness levels and a remarkable contrast ratio, the VX-2000d exhibits deep blacks and brilliant colors, enhancing the overall viewing experience.

The VX-2000d incorporates advanced DLP (Digital Light Processing) technology that provides remarkable color accuracy and consistency across a variety of content. The use of the latest imaging chips and sophisticated optics creates lifelike imagery that draws viewers into the action. Additionally, this projector supports a wide color gamut, allowing it to reproduce a broader range of colors for enhanced realism.

Another highlight of the Runco VX-2000d is its sophisticated lens system. The projector features a high-quality glass lens that minimizes optical distortion while ensuring sharp focus across the entire image. Its motorized lens shift, zoom, and focus functionalities allow for easy installation and flexibility in positioning the projector within various home theater setups.

The VX-2000d also supports various video formats, including 24p film and 1080p/60, making it versatile for different types of content. Also, with its built-in proprietary video processing technology, the projector upscales standard-definition and high-definition content to optimized viewing experiences.

Furthermore, the Runco VX-2000d is equipped with a range of connectivity options, including HDMI, Component, and VGA inputs, ensuring compatibility with numerous devices such as Blu-ray players, gaming consoles, and streaming devices.

With its combination of excellent build quality, robust performance, and impressive features, the Runco VX-2000d remains a top choice for enthusiasts seeking an unparalleled home theater experience. Whether enjoying action-packed films or serene nature documentaries, this projector immerses viewers in a cinematic journey that captivates the senses.
Top Page Image Contents