Sharp PG-C20XU operation manual English

Page 2
U.S.A. ONLY
U.S.A. ONLY
U.S.A. ONLY
U.S.A. ONLY

Before using the LCD projector, please read this operation manual carefully.

Important

Information

OPERATION MANUAL

IMPORTANT

For your assistance in reporting the loss or theft of your Color LCD Projector, please record the Serial Number located on the bottom of the projector and retain this information. Before recycling the packaging, please be sure that you have checked the contents of the carton thoroughly against the list of “Supplied Accessories” on page 11.

ENGLISH

Model No.: PG-C20XU

Serial No.:

There are two important reasons for prompt warranty registration of your new SHARP LCD Projector, using the REGISTRATION CARD packed with the projector.

1.WARRANTY

This is to assure that you immediately receive the full benefit of the parts, service and labor warranty applicable to your purchase.

2.CONSUMER PRODUCT SAFETY ACT

To ensure that you will promptly receive any safety notification of inspection, modification, or recall that SHARP may be required to give under the 1972 Consumer Product Safety Act, PLEASE

READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE.

WARNING: High brightness light source. Do not stare into the beam of light, or view directly. Be especially careful that children do not stare directly into the beam of light.

WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT REMOVE SCREWS

EXCEPT SPECIFIED USER

SERVICE SCREW.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER.

NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk or electric shock to persons.

The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equip- ment.

INFORMATION

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter- ference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the operation manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

The enclosed computer cable must be used with the device. The cable is provided to ensure that the device complies with FCC Class A verification.

E-1

Image 2
Contents PG-C20XU English Product Disposal Important Safeguards Outstanding Features Advanced Compatibility with HIGH-END Workstations and PCSContents Lamp Monitor Function Temperature Monitor FunctionUsage Guidelines For Windows To Install Acrobat Reader from the CD-ROMFor Sharp Assistance U.S.A. only For MacintoshPart Names ProjectorOpening the Flip Cover Remote ControlInserting the Batteries Part NamesSetup & Connections Supplied Accessories RRMCG1613CESAConnecting the Projector to a Computer Connecting the ProjectorConnecting the Power Cord Connecting a computer using the standard 15-pin inputProjector Connecting the Projector to Video EquipmentPlug and Play function Connecting an amplifier and other audio components AmplifierProject Connecting RS-232CPortConnecting the Projector Basic Operations Maintenance indicatorsProjector Remote control Basic Operations Normal Mode Setting up the ScreenStandard Setup Front Projection Stretch Mode Border ModeCeiling-mount Setup Using the Adjustment FeetReversed Image Setup Digital Keystone Correction Using the GUI menuRemote control Using the Keystone buttons GUI On-screen DisplayConnecting the Remote Mouse Receiver PS/2 portOperating the Wireless Mouse from the Remote Control Remote Control/Mouse Receiver PositioningUsing as a Wireless Mouse Controlling the ProjectorInput 2 S-VIDEO or 3 Video mode Input 1 RGB modeInput 1 Component mode Main menu Sub menuMain menu Sub menu Selecting the On-screen Display Language Picture Adjustments Input 2 S-VIDEO or Input 3 Video modeComputer Image Adjustments Input 1 mode only Projector Remote control Auto Sync AdjustmentAdjusting the Computer Image Computer Image Adjustments Input 1 mode onlyUseful Features Remote control On-screen Display Digital Image MagnificationGamma Correction Selecting the Picture Display Mode Computer VIDEO/DTVAutomatic Power Shutoff Function Checking the Input Signal and the Lamp Usage TimeSelecting a Background Image Description of Background ImagesSpecial Mode Adjustment Reverse/Invert Image FunctionAir Filter Maintenance Cleaning the air filterAir Filter Maintenance Replacing the air filterLamp Lamp/Maintenance IndicatorsMaintenance Indicators Replacing the Projection Lamp Removing and installing the lamp unitCord.Disconnect the power Press Input and Auto Sync on Resetting the lamp timerReplacing the Projection Lamp Press Auto Sync and Menu onUsing the Kensington Lock TroubleshootingAppendix Attaching the Lens CapComputer Input 1 Port 15-pin mini D-sub female connector Connection Pin AssignmentsCommunication conditions RS-232C Port SpecificationsPC control Basic formatRS-232C Port Specifications Commands ProjectorComputer Compatibility Chart Specifications PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43/DTV 480PDimensions Units inches mmGlossary Active digital keystone correctionIndex Sharp Corporation