Sharp PG-C20XU operation manual Resetting the lamp timer, Replacing the Projection Lamp

Page 42

Replacing the Projection Lamp

7 Remove the lamp cage cover.

8 Remove the lamp cage.

Turn over the projector and loosen the user service screw that secures the lamp cage cover. Then lift open the cover in the direction of the arrow.

Loosen the securing screws on the lamp cage. Hold the lamp cage by the handle and pull it towards you.

&Troubleshooting

Maintenance

9 Insert the new lamp cage.	10 Attach the lamp cage cover.
Press the lamp cage firmly into the lamp cage	Slide the lamp cage cover in the direction of the
compartment. Fasten the securing screws.	arrow. Then tighten the user service screw.

Resetting the lamp timer

1 cord.Connect the power

2 Reset the lamp timer.

Plug the power cord into the AC

1 Press KEYSTONE ∂ and

“LAMP 0000H” is

socket of the projector.

KEYSTONE ƒ on the projector at

displayed, indicating that

the same time.

the lamp timer is reset.

2 Press INPUT and AUTO SYNC on

the projector at the same time.

3 Press AUTO SYNC and MENU on

the projector at the same time.

1

INPUT

AUTO SYNC

2

BACK

ENTER MENU

3

•Reset the lamp timer only after replacing the lamp.

E-41

Image 42

Contents PG-C20XU English Product Disposal Important Safeguards Outstanding Features Advanced Compatibility with HIGH-END Workstations and PCSContents Temperature Monitor Function Usage GuidelinesLamp Monitor Function For Windows To Install Acrobat Reader from the CD-ROMFor Sharp Assistance U.S.A. only For MacintoshPart Names ProjectorOpening the Flip Cover Remote ControlInserting the Batteries Part NamesSetup & Connections Supplied Accessories RRMCG1613CESAConnecting the Projector to a Computer Connecting the ProjectorConnecting the Power Cord Connecting a computer using the standard 15-pin inputConnecting the Projector to Video Equipment Plug and Play functionProjector Connecting an amplifier and other audio components AmplifierConnecting RS-232CPort Connecting the ProjectorProject Maintenance indicators Projector Remote controlBasic Operations Basic Operations Normal Mode Setting up the ScreenStandard Setup Front Projection Stretch Mode Border ModeUsing the Adjustment Feet Reversed Image SetupCeiling-mount Setup Digital Keystone Correction Using the GUI menuRemote control Using the Keystone buttons GUI On-screen DisplayConnecting the Remote Mouse Receiver PS/2 portOperating the Wireless Mouse from the Remote Control Remote Control/Mouse Receiver PositioningUsing as a Wireless Mouse Controlling the ProjectorInput 1 RGB mode Input 1 Component modeInput 2 S-VIDEO or 3 Video mode Main menu Sub menuMain menu Sub menu Selecting the On-screen Display Language Picture Adjustments Input 2 S-VIDEO or Input 3 Video modeComputer Image Adjustments Input 1 mode only Projector Remote control Auto Sync AdjustmentAdjusting the Computer Image Computer Image Adjustments Input 1 mode onlyUseful Features Remote control On-screen Display Digital Image MagnificationGamma Correction Selecting the Picture Display Mode Computer VIDEO/DTVAutomatic Power Shutoff Function Checking the Input Signal and the Lamp Usage TimeSelecting a Background Image Description of Background ImagesSpecial Mode Adjustment Reverse/Invert Image FunctionAir Filter Maintenance Cleaning the air filterAir Filter Maintenance Replacing the air filterLamp/Maintenance Indicators Maintenance IndicatorsLamp Removing and installing the lamp unit Cord.Disconnect the powerReplacing the Projection Lamp Press Input and Auto Sync on Resetting the lamp timerReplacing the Projection Lamp Press Auto Sync and Menu onUsing the Kensington Lock TroubleshootingAppendix Attaching the Lens CapComputer Input 1 Port 15-pin mini D-sub female connector Connection Pin AssignmentsCommunication conditions RS-232C Port SpecificationsPC control Basic formatRS-232C Port Specifications Commands ProjectorComputer Compatibility Chart Specifications PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43/DTV 480PDimensions Units inches mmGlossary Active digital keystone correctionIndex Sharp Corporation