Specifications

Product type	LCD Projector
Model	PG-C20XU
Video system	PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43/DTV 480P
Display method	LCD panel 3, RGB optical shutter method
LCD panel	Panel size: 0.9 (13.9 [H] 18.5 [W] mm)
	Display method: Translucent TN liquid crystal panel
	Drive method: TFT (Thin Film Transistor) Active Matrix panel
Lens	No. of dots: 786,432 dots (1,024 [H] 768 [V])
Lens	1–1.2zoom lens, F2.3–2.6, f 36.0–43.2 mm
Projection lamp	DC 150 W lamp
Contrast ratio	500:1
Video input signal	RCA Connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω terminated
S-video input signal	RCA Connector: AUDIO, 0.5 Vrms more than 22 kΩ (stereo)
S-video input signal	4-pin Mini DIN connector
	Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated

C(chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated Horizontal resolution 580 TV lines (video input)

Audio output 1.0 W (monaural)

Computer RGB input signal	15-PIN MINI D-SUB CONNECTOR (COMPUTER INPUT 1 port, COMPUTER OUTPUT port):
	RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive,
	75 Ω terminated
	STEREO MINIJACK: AUDIO, 0.5 Vrms, more than 22 kΩ (stereo)
	HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) or composite sync (Apple only)
	VERTICAL SYNC. SIGNAL: Same as above
Pixel clock	12–108 MHz
Vertical frequency	43–85 Hz
Horizontal frequency	15–80 kHz
Computer control signal	9-pin Mini DIN female connector (RS-232C port)
Speaker system	1 7⁄64 (2.8 cm) round
Rated voltage	AC 100–240 V
Input current	2.6 A
Rated frequency	50/60 Hz
Power consumption	230 W (Selecting “OFF“ in the “Power Save Mode”.)

200W (Selecting “ON” in the ”Power Save Mode”.)

Operating temperature 41°F to 95°F (5°C to 35°C) Storage temperature 4°F to 140°F (20°C to 60°C)

Cabinet Plastic I/R carrier frequency 38 kHz

Dimensions (approx.) 10 15⁄64 (W) 2 29⁄32 (H) 8 5⁄32 (D) (260 74 207 mm) (main body only)

	10 15⁄64 (W) 3 15⁄64 (H) 8 5⁄32 (D) (260 82 207 mm) (including
	adjustment feet and projecting parts)
Weight (approx.)	5.73 lbs. (2.6 kg)
Supplied accessories	Remote control, Two AAA size batteries, Power cord (11 10, 3.6 m), Computer RGB
	cable (9 10, 3 m), Computer audio cable (9 10, 3 m), PS/2 mouse control cable (3 3, 1
	m), USB mouse control cable (4 11, 1.5 m), DIN-D-sub RS-232C cable (6 45⁄64 , 15 cm),
	Remote mouse receiver, Extra air filter, Lens cap (attached), Lens cap strap, CD-ROM,
	LCD projector operation manual, LCD projector quick reference guide
Replacement parts	Lamp unit (Lamp/cage module) (BQC-PGC20X//1), Remote control (RRMCG1613CESA),
	AAA size batteries, Power cord (CACCU5013DE01), Computer RGB cable
	(QCNWG0002CEZZ), Computer audio cable (QCNW-4870CEZZ), PS/2 mouse control
	cable (QCNW-5113CEZZ), USB mouse control cable (QCNW-5680CEZZ), DIN-D-sub RS-
	232C cable (QCNW-5288CEZZ), Remote mouse receiver (RUNTK0694CEZZ), Air filter
	(PFILD0123CEZZ), Lens cap (PCOVZ1095CEKA), Lens cap strap (UBNDT0013CEZZ),
	CD-ROM (UDSKA0029CEN1), LCD projector operation manual (TINS-7204CEZZ), LCD
	projector quick reference guide (TINS-7205CEZZ)
This SHARP projector uses LCD (Liquid Crystal Display) panels. These		This unit has some inactive TFTs within acceptable tolerances which
very sophisticated panels contain 786,432 pixels ( RGB) TFTs (Thin		may result in illuminated or inactive dots on the picture screen. This
Film Transistors). As with any high technology electronic equipment		will not affect the picture quality or the life expectancy of the unit.
such as large screen TVs, video systems and video cameras, there		If you have any questions about this matter, please call toll free 1-888-
are certain acceptable tolerances that the equipment must conform		GO-SHARP (1-888-467-4277).	U.S.A. ONLY
to.

Specifications are subject to change without notice.	Appendix

E-48

Specifications

PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43/DTV 480P