Sharp PG-C20XU operation manual Computer Image Adjustments Input 1 mode only

Page 29

Computer Image Adjustments (INPUT 1 mode only)

Projector

Remote control Auto Sync Adjustment

• Used to automatically adjust a computer image.

POWER

ON/OFF LAMP

TEMP.

•Auto Sync adjustment can be made manually by

pressing AUTO SYNC.

KEYSTONE

INPUT

AUTO SYNC

BACKENTER

MENU

1

• The sync adjustment is automatically made each time the projector is turned on while connected to a computer or the input selection is changed.

1Press AUTO SYNC.

On-screen Display	During Auto Sync adjustment, “Adjusting The Image”
	is displayed as shown on the left.
	is displayed as shown on the left.

•Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector.

•When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 29.)

Operation

E-28

Image 29

Contents PG-C20XU English Product Disposal Important Safeguards Advanced Compatibility with HIGH-END Workstations and PCS Outstanding FeaturesContents Lamp Monitor Function Temperature Monitor FunctionUsage Guidelines For Sharp Assistance U.S.A. only To Install Acrobat Reader from the CD-ROMFor Windows For MacintoshProjector Part NamesInserting the Batteries Remote ControlOpening the Flip Cover Part NamesSetup & Connections RRMCG1613CESA Supplied AccessoriesConnecting the Power Cord Connecting the ProjectorConnecting the Projector to a Computer Connecting a computer using the standard 15-pin inputProjector Connecting the Projector to Video EquipmentPlug and Play function Amplifier Connecting an amplifier and other audio componentsProject Connecting RS-232CPortConnecting the Projector Basic Operations Maintenance indicatorsProjector Remote control Basic Operations Standard Setup Front Projection Setting up the ScreenNormal Mode Stretch Mode Border ModeCeiling-mount Setup Using the Adjustment FeetReversed Image Setup Remote control Using the Keystone buttons Using the GUI menuDigital Keystone Correction GUI On-screen DisplayPS/2 port Connecting the Remote Mouse ReceiverUsing as a Wireless Mouse Remote Control/Mouse Receiver PositioningOperating the Wireless Mouse from the Remote Control Controlling the ProjectorInput 2 S-VIDEO or 3 Video mode Input 1 RGB modeInput 1 Component mode Sub menu Main menuMain menu Sub menu Selecting the On-screen Display Language Input 2 S-VIDEO or Input 3 Video mode Picture AdjustmentsProjector Remote control Auto Sync Adjustment Computer Image Adjustments Input 1 mode onlyComputer Image Adjustments Input 1 mode only Adjusting the Computer ImageUseful Features Digital Image Magnification Remote control On-screen DisplayGamma Correction Computer VIDEO/DTV Selecting the Picture Display ModeChecking the Input Signal and the Lamp Usage Time Automatic Power Shutoff FunctionDescription of Background Images Selecting a Background ImageReverse/Invert Image Function Special Mode AdjustmentCleaning the air filter Air Filter MaintenanceReplacing the air filter Air Filter MaintenanceLamp Lamp/Maintenance IndicatorsMaintenance Indicators Replacing the Projection Lamp Removing and installing the lamp unitCord.Disconnect the power Replacing the Projection Lamp Resetting the lamp timerPress Input and Auto Sync on Press Auto Sync and Menu onTroubleshooting Using the Kensington LockAttaching the Lens Cap AppendixConnection Pin Assignments Computer Input 1 Port 15-pin mini D-sub female connectorPC control RS-232C Port SpecificationsCommunication conditions Basic formatProjector RS-232C Port Specifications CommandsComputer Compatibility Chart PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43/DTV 480P SpecificationsUnits inches mm DimensionsActive digital keystone correction GlossaryIndex Sharp Corporation