Sim2 Multimedia SVD 800 HD installation manual Projector centering, Lens focus adjustment

Page 24

4.6 Projector centering

The first step towards a good installation is centering the projector with respect to the screen. This can be done using two pieces of equally long cord, as illustrated in the following figure:

 

 

 

SCREEN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CORDS OF THE SAME LENGTH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AND PROJECTOR

CENTRE

 

 

Reference

 

 

SCREEN

 

 

 

Reference

 

 

corner

 

 

 

 

 

 

corner

 

 

 

 

 

 

 

 

 

 

 

 

 

Fig. 53

It is necessary to check that the position of the two corners at the front of the projector is centred with respect to the position of the cords, as illustrated in the figure.

Once you have done this you can be sure that the screen and the projector are orthogonal and centred, essential conditions for the best performance.

4.7Optical and electrical adjustments

Turn the projector on with the main switch on the left of the rear panel; the red pilot light indicates the stand-by state.

SVD 800 HD

4.8 Lens focus adjustment

Each lens must be focused individually with the tubes on, one at a time and following this procedure:

1.Select the HATCH test pattern by pressing the TEST button on the remote control. An external pattern signal can be used if you prefer.

2.Adjust with a low contrast (e.g. 30) and a medium-low background brightness (e.g. 40)

3.Turn the other tubes off using the push buttons R,G,B, on the remote control.

4.Loosen the wing screw (B) Fig. 54 of the green lens, turn the lens assembly either to the right or left to adjust the focus of the picture in the middle of the screen and then tighten the screw. (B).

A

B

Fig. 54

ENGLISH

If the projector remains in stand-by press the button on the remote control or the or arrow buttons on the rear panel. The green pilot light indicates the projector is on.

To turn the projector off, press or the main switch.

Proceed with installation using the internal test pictures. They can be used by pressing TEST on the complete functions remote control (RC3000) and selecting the most appropriate test signal.

5.Loosen the wing screw (A) of the green lens, turn the lens assembly either to the right or left to adjust the focus of the picture on the borders of the screen and then tighten the screw (A).

6.Look at the screen closely and check the result; repeat the adjustments if necessary.

7.Repeat steps 3, 4 and 5 for the red and blue lenses.

Attention:

DO NOT move the electrostatic focus adjustment potentiometers. They were factory-set and should only be adjusted by qualified personnel.

23

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Video Projector User Remote Control RC InstallationIndex General InformationComplete Function RC3000 Remote Control Memory ManagerElectric Shock Hazard Mains Power Safety and RegulationsProjector identification ∙ WarningPower cabling Cleaning the projectorServicing Spare partsCathode-ray tube phosphor burning Packing the projectorRoom lighting Back panelPower switch ∙ the Following Functions are on the PanelUser Remote Control RC ∙∙∙RC 3100 User Remote Control Projector Power OnPicture adjustment BatteriesScreen format selection Information InfoMuting video button VCR button Sync filterVideo Menu UPC converterEnter 15Input Settings BlankingEHT Noise RED Options White MenuMemo , ENTER, Exit Working time OSD OptionsInstallation menu How to enter the Service ModeLogo Installation Installation procedureRemoving the cover Removing the top cover Installation choice Removing the front panelDesk-top front projection Front ProjectionDesktop rear projection Ceiling front projectionDesktop Rear Projection Bracket must be fixed very carefullyScreen Ceiling Front ProjectionCeiling rear projection Projection angle measurementSpacers changing SpacersSpacers table 100120 Front view of the CRT150 180200 250Lens focus adjustment Projector centeringConvergence adjustment Mechanical centering of the tubesComplete Function RC3000 Remote Control Complete function RC3000 remote controlHow the RC 3000 remote control works Turning the projector onTest patterns 18X13 Hatch 9X7 HatchCharacters Dots Cross White Field White Window Colour BarsAdjustments or to store new ones Video MenuWhite balance Memory ManagerHow to enter the memory manager How to insert a labelHow to change an aspect ratio Press or . Select Memory MANAGER, EnterHow to store a new input signal Horizontal and vertical frequenciesLoad Aspect RatioCopy Copy Move Move Installation types Fine picture adjustmentsPhase Delete DELPicture dimensions Size ShiftLinearity This menu changes according to the zone you are adjusting 11.6 BOWKeystone PincushionHow to reset the adjustments Reset How to store the convergence adjustments MemoReset ColoursTechnical Specifications Display Performance Optional Accessories Standard AccessoriesElectrical Data Video connector 4pin, mini-DIN No. pin SignalPIN Assignment VGA inputTroubleshooting Problem Causes RemedyPilot Light Meaning Procedure d’installation au plafond French InstructionSelection du voltage et cable d’alimentation Cet equipement doit être mis a la terreGerman Instructions 16.1Hinweis gemäß behördlicher Vorschriften

SVD 800 HD specifications

The Sim2 Multimedia SVD 800 HD is a state-of-the-art digital video projector that stands out in the competitive landscape of home entertainment technology. Equipped with cutting-edge features, this projector offers an unparalleled viewing experience that caters to both cinephiles and casual movie watchers alike.

One of the most notable characteristics of the SVD 800 HD is its advanced DLP (Digital Light Processing) technology. This technology ensures high-quality image reproduction, delivering vibrant colors, deep blacks, and sharp details. The SVD 800 HD boasts a native resolution of 1920 x 1080 pixels, which allows for true Full HD playback. This resolution is crucial for today's high-definition content, making it an ideal choice for Blu-ray movies, gaming, and streaming services.

Another key feature of the SVD 800 HD is its remarkable brightness level, producing up to 800 ANSI lumens. This means it can perform well in both dark home theaters and brighter living room environments. Additionally, the projector supports a wide color gamut, ensuring that colors appear rich and lifelike, enhancing the overall visual experience.

A significant technological advantage of the SVD 800 HD is its enhanced contrast ratio, which is pivotal for achieving more depth in images. The high contrast elevates shadow details and highlights, providing a more immersive viewing experience. The incorporation of advanced image processing technologies further optimizes video quality and minimizes artifacts, ensuring smooth playback of fast-moving scenes.

Connectivity is another area where the SVD 800 HD excels. The projector is equipped with multiple HDMI ports, allowing easy connection to various devices, including Blu-ray players, gaming consoles, and streaming devices. This flexibility makes it a versatile choice for any home theater setup.

In terms of design, the SVD 800 HD is sleek and modern, fitting seamlessly into a variety of home aesthetics. The compact size of the projector allows for easy installation and portability. Thermal management technologies ensure that the projector operates quietly, minimizing distractions during important scenes or gaming sessions.

In summary, the Sim2 Multimedia SVD 800 HD is a powerful and sophisticated digital projector that combines high-quality imaging, versatile connectivity, and user-friendly design. Whether you are watching the latest blockbuster or diving into an immersive gaming session, the features and technologies of the SVD 800 HD are sure to enhance your entertainment experience significantly.
Top Page Image Contents