Sim2 Multimedia SVD 800 HD Screen format selection, Information Info, Muting video button

Page 11

SVD 800 HD

3.6 Screen format selection

To select the correct screen format:

(NORMAL, SMALL, LETTER BOX, CINEMA, WIDE).

Press the button. One of the previous screen formats will appear (for instance 16/9).

16/9

Fig. 9

Each time you press a button relative to the AV inputs, you are choosing one of the aspect ratios stored in the relative memory bank. In the memory banks (see: Memory Manager) you can store several setups with the same input signal but with different aspect ratios.

Each time the button is pressed the same signal is displayed with a different aspect ratio (only if it has been stored in the relative memory bank). The possible aspect ratios are: NORMAL (NORMAL=4/3); SMALL; LETTER

BOX; CINEMA; WIDE.

The message will disappear shortly afterwards.

Note: Only by selecting the SMALL aspect ratio format will you get +12V on the rear panel connector marked by

, used to control the screen.

3.8 Information (INFO)

The INFO menu displays information on a current input signal.

- GENERAL INFORMATION 1/2 -

INPUT

VIDEO1

HORIZ. FREQ.

15.66 KHZ

VERT. FREQ.

50 HZ

VIDEO STANDARD

PAL

COMB FILTER

ON

UP CONVERTER

OFF

BANK NAME

PAL

BANK LOADED

01

Fig. 11

Press INFO again. The second part of the information will be displayed relating to the image parameters and settings.

- GENERAL INFORMATION 2/2 -

SYNC SOURCE

SEPARATE H/V

CLAMPS. POS.

AUTO

SYNC FILTER

SLOW

TLV SYNC

OFF

COLOR TEMP.

6500 °K

INSTALLATION

CEILING-FRONT

ASPECT RATIO

NORMAL

SOFTWARE REL.

6.00

Fig. 12

Press a third time or ESC to exit.

3.9 Muting video button

Press MUTE for about 2 seconds. The picture will darken while the projector stays on; the picture will reappear immediately if you press the button again.

3.7 VCR button (Sync filter)

Press VCR to change the sync time constant. Whenever you press the VCR button you toggle the sync filter type from FAST to SLOW and vice versa.

Note: FAST is recommended for the VCR. SLOW is recommended for video signal broadcasting.

FAST

Fig. 10

3.10 Normalised button

Press . The adjustments relative to contrast, brightness, colour saturation, hue and peaking, stored in the current bank, will be loaded automatically.

3.11 UPC button

Press UPC. It will turn on or off the converter that doubles the input signal lines.

Note: only on models with UPC.

3.12 Freeze button

Press . To have a still picture. When pressed again the picture will run normally.

This function is only active if the UPC converter is active.

10

Image 11
Contents Video Projector General Information User Remote Control RCInstallation IndexMemory Manager Complete Function RC3000 Remote ControlElectric Shock Hazard ∙ Warning Mains PowerSafety and Regulations Projector identificationSpare parts Power cablingCleaning the projector ServicingBack panel Cathode-ray tube phosphor burningPacking the projector Room lighting∙ the Following Functions are on the Panel Power switch∙∙∙ User Remote Control RCBatteries RC 3100 User Remote ControlProjector Power On Picture adjustmentVCR button Sync filter Screen format selectionInformation Info Muting video buttonEnter Video MenuUPC converter EHT Noise RED 15Input SettingsBlanking Memo , ENTER, Exit OptionsWhite Menu OSD Options Working timeLogo Installation menuHow to enter the Service Mode Removing the cover Removing the top cover InstallationInstallation procedure Front Projection Installation choiceRemoving the front panel Desk-top front projectionBracket must be fixed very carefully Desktop rear projectionCeiling front projection Desktop Rear ProjectionCeiling Front Projection ScreenSpacers Ceiling rear projectionProjection angle measurement Spacers changingFront view of the CRT Spacers table100 120250 150180 200Projector centering Lens focus adjustmentMechanical centering of the tubes Convergence adjustmentComplete function RC3000 remote control Complete Function RC3000 Remote ControlTurning the projector on How the RC 3000 remote control worksDots Cross White Field White Window Colour Bars Test patterns18X13 Hatch 9X7 Hatch CharactersMemory Manager Adjustments or to store new onesVideo Menu White balancePress or . Select Memory MANAGER, Enter How to enter the memory managerHow to insert a label How to change an aspect ratioAspect Ratio How to store a new input signalHorizontal and vertical frequencies LoadCopy Copy Move Move Delete DEL Installation typesFine picture adjustments PhaseLinearity Picture dimensions SizeShift Pincushion This menu changes according to the zone you are adjusting11.6 BOW KeystoneColours How to reset the adjustments ResetHow to store the convergence adjustments Memo ResetTechnical Specifications Display Performance Electrical Data Optional AccessoriesStandard Accessories VGA input Video connector 4pin, mini-DINNo. pin Signal PIN AssignmentPilot Light Meaning TroubleshootingProblem Causes Remedy French Instruction Procedure d’installation au plafond16.1Hinweis gemäß behördlicher Vorschriften Selection du voltage et cable d’alimentationCet equipement doit être mis a la terre German Instructions

SVD 800 HD specifications

The Sim2 Multimedia SVD 800 HD is a state-of-the-art digital video projector that stands out in the competitive landscape of home entertainment technology. Equipped with cutting-edge features, this projector offers an unparalleled viewing experience that caters to both cinephiles and casual movie watchers alike.

One of the most notable characteristics of the SVD 800 HD is its advanced DLP (Digital Light Processing) technology. This technology ensures high-quality image reproduction, delivering vibrant colors, deep blacks, and sharp details. The SVD 800 HD boasts a native resolution of 1920 x 1080 pixels, which allows for true Full HD playback. This resolution is crucial for today's high-definition content, making it an ideal choice for Blu-ray movies, gaming, and streaming services.

Another key feature of the SVD 800 HD is its remarkable brightness level, producing up to 800 ANSI lumens. This means it can perform well in both dark home theaters and brighter living room environments. Additionally, the projector supports a wide color gamut, ensuring that colors appear rich and lifelike, enhancing the overall visual experience.

A significant technological advantage of the SVD 800 HD is its enhanced contrast ratio, which is pivotal for achieving more depth in images. The high contrast elevates shadow details and highlights, providing a more immersive viewing experience. The incorporation of advanced image processing technologies further optimizes video quality and minimizes artifacts, ensuring smooth playback of fast-moving scenes.

Connectivity is another area where the SVD 800 HD excels. The projector is equipped with multiple HDMI ports, allowing easy connection to various devices, including Blu-ray players, gaming consoles, and streaming devices. This flexibility makes it a versatile choice for any home theater setup.

In terms of design, the SVD 800 HD is sleek and modern, fitting seamlessly into a variety of home aesthetics. The compact size of the projector allows for easy installation and portability. Thermal management technologies ensure that the projector operates quietly, minimizing distractions during important scenes or gaming sessions.

In summary, the Sim2 Multimedia SVD 800 HD is a powerful and sophisticated digital projector that combines high-quality imaging, versatile connectivity, and user-friendly design. Whether you are watching the latest blockbuster or diving into an immersive gaming session, the features and technologies of the SVD 800 HD are sure to enhance your entertainment experience significantly.