Sim2 Multimedia SVD 800 HD installation manual Copy Copy Move Move

		SVD 800 HD
5.8.7 Copy (COPY)	5.8.8 MOVE (MOVE)
This function allows you to copy a memory location	This function allows you to move a memory bank to
containing settings in another location.	another position on the list.
Press or . Select COPY, ENTER.	Press or . Select MOVE.

ENGLISH

- MEMORY MANAGER - BANK 01 SIGNAL NAME PAL

LOAD		N	HOR VER		F	LABEL
	00		33.7	60	N	ATSC1080
		01	15.6	50	N	PAL
COPY
		02	15.7	60	N	NTSC358
	03		31.5	70	N	DOS-VGA
	04		31.5	60	N	VGA-640
MOVE	05		31.2	60	N	31K 10HZ
	06		48.4	00	N	VESA 1024
	07		64.3	60	N	64K 60HZ
DEL	08		71.7	76	N	UN 76HZ
	09		44.9	60	N	ATSC720P

COPY A BANK TO ANOTHER ONE

Fig. 88

Press or . Select a memory bank (from 00 to 29) to be copied.

Press ENTER. The following message will appear:

COPY A BANK FROM 01 TO

Fig. 89

- MEMORY MANAGER - BANK 01 SIGNAL NAME PAL

LOAD		N	HOR VER		F	LABEL
	00		33.7	60	N	ATSC1080
COPY		01	15.6	50	N	PAL
		02	15.7	60	N	NTSC358
	03		31.5	70	N	DOS-VGA
	04		31.5	60	N	VGA-640
MOVE	05		31.2	60	N	31K 10HZ
	06		48.4	00	N	VESA 1024
	07		64.3	60	N	64K 60HZ
DEL	08		71.7	76	N	UN 76HZ
	09		44.9	60	N	ATSC720P

MOVE A BANK TO ANOTHER ONE

Fig. 93

Press ENTER. The following message will appear:

MOVE A BANK FROM

Fig. 94

Press or . Select the memory bank (from 00 to 29)
where to copy the information.	Press or . Select the memory bank (from 00 to 29).
Press ENTER to confirm. The following message will	Press ENTER. The following message will appear:
appear:

COPY A BANK FROM TO XX ?

Fig. 90

Press ENTER to confirm. If the destination memory bank is free you will be asked to enter a name for the bank and the following message will appear:

ENTER NEW BANK NAME - - - - - - - -

Fig. 91

Press or . Select the characters of the name (label).

Press or . Change the cursor position.

Repeat until the name is complete and then press ENTER. The following message will appear:

- MEMORY MANAGER -

BANK	01 SIGNAL NAME				PAL
LOAD	N	HOR VER		F	LABEL
	00	33.7	60	N	ATSC1080
COPY	01	15.6	50	N	PAL
	02	15.7	60	N	NTSC358
CONFIRM03 NEW31.5 NAME70				N:	DOSXXX-VGA
	04	31.5	60	N	VGA-640
MOVE	05	31.2	60	N	31K 10HZ
	06	48.4	00	N	VESA 1024
	07	64.3	60	N	64K 60HZ
DEL	08	71.7	76	N	UN 76HZ
	09	44.9	60	N	ATSC720P

ENTER NEW BANK NAME XXX - - - - -

Fig. 92

Press ENTER to confirm.

Note: The copy will be made even if the horizontal and vertical frequencies do not match those of the video input signal.

MOVE A BANK FROM 01 TO

Fig. 95

Press or . Select a free destination memory bank (from 00 to 29).

Press ENTER. The following message will appear:

MOVE A BANK FROM 01 TO 13 ?

Fig. 96

Press ENTER to confirm. The following message will appear:

MOVE BANK TO ANOTHER ONE

Fig. 97

Press EXIT to return to the previous menu.

Note: If the destination bank is not free the following message will appear:

DESTINATION MUST BE EMPTY

Fig. 98

31