Vidikron 60 » Projection Distance and Screen Size, Screen Installation, Throw Distance Chart

Page 18

INSTALLING THE PROJECTOR

»Projection Distance and Screen Size

•This projector uses 1.3x manual zoom lens for projection.

•Although the focusable projection distance is about 1.6 m ~ 12 m, the projection distance recommendable for performance is about 2 m ~ 8 m. Install the projector within this range and adjust the screen size when the aspect ratio of the screen is 16:9.

•If the KEYSTONE is adjusted, the screen becomes smaller.

Screen Installation

��

�

�	��	��

� � � ��

16:9 and 4:3 Screen

A 4:3 aspect-ratio picture is projected based on the width of the range in which a 16:9 aspect-ratio picture is projected. The diagonal length of a 4:3 aspect-ratio screen is about 81.7 % that of a 16:9 aspect-ratio screen.

Throw Distance Chart

��

��	��	��	��	��
��	��	��	��	��
��	��	��	��	��
��	��	��	��	��
��	��	��	��	��
��	��	��	��	��
��	��	��	��	��
��	��	��	��	��
��	��	��	��	��
��	��	��	��	��
��	��	��	��	��
��	��	��	��	��
��	��	��	��	��
��	��	��	��	��
		��	��

��

17

Image 18

Contents L a P R O J E C T O R Table of Contents Introduction » The features you’ll enjoy include» Contents of the package » OptionsFCC Information U.S.A. only Safety PrecautionsAbout the installation place About burning-in of the D-ILA deviceSafety Precautions Power Connection Viewing conditions Brightness of the room Cleaning the lensUsing the screen mode switch function Do not view the screen continually for a long timeLimited Warranty For Projectors, Video Processors and ControllersEffective Warranty Date To Open the Projector Cover Controls and Features» Projector Chassis Cover To Close the Projector Cover» Control Panel on the Projector Lamp ButtonRGB1 » Connector PanelInput Terminal DVI RGB3Audio » Remote Control OFF CursorENT Enter Button PC 16x9 ButtonPC 4x3 Button VID S-Video ButtonInstalling the Projector » Installing the Projector against the Screen» Projection Distance and Screen Size Screen InstallationThrow Distance Chart 43 ScreenVideo Signals Response to Decoder Connecting to Various Devices» Signals that can be input into the projector Responds to double density*5, high-vision signalsHdcp compatible signal Allowable input signals» Connecting to Devices Connecting to Video DevicesRight Side of Projector Connecting to Computers Control from External Device Connecting the Power Cord Supplied Basic Operation Basic Operation » Frequently Used Convenient Functions Mute Pause Keystone Auto ADJAuto Adjust function Using the Auto Adjust function for automatic adjustmentsAdjustment and Settings Using Menus When video input is selected» Menu Structure » When RGB input is selected » When no image signal is inputted » Menu Operation Buttons » The Procedure for Menu Operation Press the Menu button » The Menu Configuration Adjustment and Settings Using Menus Adjustment and Settings Using Menus Setting Aspect Ratio and Resize » Setting the Aspect RatioProject the image onto the screen Press the Menu button Press the Menu button to end when adjustment is completed Select Letterbox with the cursor buttons» Setting the Resize Select Resize with the cursor buttons / and press EnterSelect Letterbox with the cursor buttons When the lamp time exceeds 2000 hours Replacing the Lamp for Service onlyWhen lamp time exceeds 1000 hours When the lamp time exceeds 2010 hoursResetting the Lamp Time for Service only Insert the power cord into the wall outletTo ensure the lamp hours have been reset RS-232 External Control Communication SpecificationsCommand Format Command Data Format Response Data FormatExternal Control Command Table RGB3Troubleshooting Symptom Probable Cause SolutionSymptom Probable Cause Solution What to do When These Messages are Displayed Message Cause Contents» About Warning Indicators Dimensions Specifications Vision Model 60 Projector