Vidikron 60 manual Controls and Features, » Projector Chassis Cover, To Open the Projector Cover

Page 10

CONTROLS AND FEATURES

»Projector Chassis Cover

Cover Latches

To Open the Projector Cover:

(1)Locate the two black cover latches under the front edge.

(2)Push the latches firmly IN toward the center of the unit. DO NOT FORCE THE TABS. It may be easier to loosen one side first, then the other.

(3)When the cover latches are loosened, then the top cover will swing upward and reveal the system control panel, cable connection panel and more.

To Close the Projector Cover:

(1)To close simply reposition the cover over the latches and press firmly, Latches will then snap closed.

(2)IMPORTANT - When finished working under the cover and latches have been initially secured. Move the latches OUT TOWARD THE COVER EDGES. This securely locks the cover to the projector.

9

Image 10

Contents L a P R O J E C T O R Table of Contents Introduction » The features you’ll enjoy include» Contents of the package » OptionsFCC Information U.S.A. only Safety PrecautionsAbout the installation place About burning-in of the D-ILA deviceSafety Precautions Power Connection Viewing conditions Brightness of the room Cleaning the lensUsing the screen mode switch function Do not view the screen continually for a long timeLimited Warranty For Projectors, Video Processors and ControllersEffective Warranty Date To Open the Projector Cover Controls and Features» Projector Chassis Cover To Close the Projector Cover» Control Panel on the Projector Lamp ButtonRGB1 » Connector PanelInput Terminal DVI RGB3Audio » Remote Control OFF CursorENT Enter Button PC 16x9 ButtonPC 4x3 Button VID S-Video ButtonInstalling the Projector » Installing the Projector against the Screen» Projection Distance and Screen Size Screen InstallationThrow Distance Chart 43 ScreenVideo Signals Response to Decoder Connecting to Various Devices» Signals that can be input into the projector Responds to double density*5, high-vision signalsHdcp compatible signal Allowable input signalsConnecting to Video Devices » Connecting to DevicesRight Side of Projector Connecting to Computers Control from External Device Connecting the Power Cord Supplied Basic Operation Basic Operation » Frequently Used Convenient Functions Mute Pause Keystone Auto ADJAuto Adjust function Using the Auto Adjust function for automatic adjustmentsWhen video input is selected Adjustment and Settings Using Menus» Menu Structure » When RGB input is selected » When no image signal is inputted » Menu Operation Buttons » The Procedure for Menu Operation Press the Menu button » The Menu Configuration Adjustment and Settings Using Menus Adjustment and Settings Using Menus » Setting the Aspect Ratio Setting Aspect Ratio and ResizeProject the image onto the screen Press the Menu button Press the Menu button to end when adjustment is completed Select Letterbox with the cursor buttons» Setting the Resize Select Resize with the cursor buttons / and press EnterSelect Letterbox with the cursor buttons When the lamp time exceeds 2000 hours Replacing the Lamp for Service onlyWhen lamp time exceeds 1000 hours When the lamp time exceeds 2010 hoursInsert the power cord into the wall outlet Resetting the Lamp Time for Service onlyTo ensure the lamp hours have been reset RS-232 External Control Communication SpecificationsCommand Format Command Data Format Response Data FormatExternal Control Command Table RGB3Troubleshooting Symptom Probable Cause SolutionSymptom Probable Cause Solution What to do When These Messages are Displayed Message Cause Contents» About Warning Indicators Dimensions Specifications Vision Model 60 Projector