Univex 700 manual 103

Page 103

Use the type of power source indicated on the projector. Use of a different power source may result in fire or electric shock. If you are not sure of the power available, consult your dealer or power company.

If you use the projector in a country other than where you purchased it, use the correct power cord for that country.

Do not overload wall outlets, extension cords, or power strips. Do not insert the plug into a dusty outlet. This can cause fire or electric shock.

Take the following precautions when handling the plug: Do not hold the plug with wet hands. Do not insert the plug into an outlet with dust present. Insert the plug firmly into the outlet. Do not pull the power cord when disconnecting the plug; always be sure to hold the plug when disconnecting it. Failure to comply with these precautions could result in fire or electric shock.

Do not place the projector where the cord can be walked on.

The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.

Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not bring your hands or face close to the vents while projection is in progress.

Before you move the projector, make sure its power is turned off, the plug is disconnected from the outlet, and all cables are disconnected.

Never try to remove the lamp immediately after use because it will be extremely hot. Before removing the lamp, turn off the power and wait at least an hour to allow the lamp to cool completely.

Do not place the source of an open flame, such as a lit candle, on or near the projector.

Do not modify the power cord. Do not place heavy objects on top of the power cord or bend, twist, or pull it excessively. Keep the power cord away from hot electrical appliances.

If the lamp breaks, ventilate the room to prevent gases contained in the lamp from being inhaled or coming in contact with the eyes or mouth.

If the projector is mounted overhead and the lamp breaks, be careful to prevent pieces of glass from falling into your eyes when you open the lamp cover.

WARNING: The cords included with this product contain chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. (This notice is provided in accordance with Proposition 65 in Cal. Health & Safety Code §25249.5 and following.)

Notices

103

Image 103
Contents User’s Guide Important Safety Information Copyright Notice Trademarks Page CContents Customizing Power and Operation Restoring the Default SettingsStarting a Slideshow Selecting Slideshow Display Options What To Do When the Lights Come On or Flash Resetting the Lamp Timer Checking Lamp UsageSolving Problems With the Remote Control Page Welcome Using Your Documentation Hdmi Projector PartsProjector Control Panel Remote Control Map Projector Dimensions Optional Accessories Registration and WarrantyELPDA01 1Setting Up the Projector Additional Components Unpacking the ProjectorPositioning the Projector You can place the projector in a variety of viewing setupsImage Determining Projection DistanceScreen size Wide to Tele Projection distance a Screen size Wide to Tele Offset B Connecting to Video Equipment Connecting an Hdmi Video Source Connecting a Component Video Source Connecting a Composite Video Source Connecting an S-Video Source Connecting an RGB Video Source Connecting to the USB Port Connecting to a ComputerUSB TypeB port Connecting to the VGA Computer Port Playing Sound Through the Projector Connecting a Digital Camera or Other USB DeviceIndicator light Inserting an SD Card Turning the Projector On and Off Power light Choose Direct Power On and press Enter Using the Direct Power On FunctionShutting Down the Projector 2Displayingthe Image and Adjusting Selecting an Image Source Adjusting the ImageAdjusting the Image Shape Adjusting the Position of the ImageFocusing and Zooming the Image Selecting the Color Mode Resizing Video Images 3PresentingControl With the Remote Turning Off the Picture and Sound Using the Remote ControlPress the A/V Mute button on the remote control or close Controlling the Picture and SoundZooming In on Your Image Stopping ActionControlling the Volume Operating Your Computer With the Remote ControlPresenting With the Remote Control Starting a Slideshow Presenting a SlideshowPresenting With the Remote Control Selecting Slideshow Display Options Highlight the options you want to use, and press Enter Option Available settingsPresenting With the Remote Control 4Fine-Tuning the Projector Using the Menu System Fine-Tuning the Projector Restoring the Default SettingsAdjusts the balance of green to magenta in the image Adjust the desired options as neededAdjusts the difference between light and dark areas Adjusts the color depth of the imageAdjusting Signal Settings Video Signal composite or S-Video signals only Raises or lowers the volume of the projector’s speaker Customizing Projector FeaturesCreate a custom startup screen, as described on Customizing Power and OperationSelect a language to use for the projector menus Using the Projector Security FeaturesEnabling Password Protection Password screen closes and projection begins Starting the Projector With a PasswordIf projection does not begin, check the following Creating Your Own Startup ScreenCapturing the Image When you see the message Completed, press Menu to exitDisabling the Projector’s Buttons Choosing When to Display the ImageUsing Security Locking Fine-Tuning the Projector 5Maintaining the Projector Cleaning the Projector Case Cleaning the LensCleaning the Air Filter Maintaining the Projector Replacing the Air FilterReplacing the Lamp Hold the lamp as shown and pull it straight out Resetting the Lamp Timer Checking Lamp Usage Select the Reset menu and press Enter. You see this screenWhen replacing batteries, take the following precautions Replacing the Remote Control BatteriesTransporting the Projector Maintaining the Projector 6Solving Problems Using On-Screen Help Checking Projector Status What To Do When the Lights Come On or FlashError lights status Solving Problems With the Image or Sound Solving Projector Operation ProblemsIf you’re using a PC notebook You can also try resetting all of the menu settings seeMessage Not Supported is displayed Image isn’t square, but keystone-shaped Computer Component Video port Image is too light or dark, or colors are incorrect Adjust the Sync setting to increase the image sharpnessProjector doesn’t respond to remote control commands Solving Problems With the Remote ControlEpson provides these technical support services Where To Get HelpSpeak to a Support Representative Purchase Supplies and Accessories Solving Problems General ATechnical SpecificationsElectrical Remote ControlDimensions Projection LampEnvironmental Safety and ApprovalsComputer, component video, composite video, and S-Video Compatible Video FormatsWSXGA60 Hdmi signals BNotices Important Safety Instructions102 103 For United States Users FCC Compliance StatementIndex Index 107 108 109