Univex 700 manual USB TypeB port

Page 30

4.Connect the square end of a USB cable to the projector’s TypeB

(square) USB port.

USB TypeB port

5.Connect the flat end of the cable to any available USB port on your notebook or desktop computer.

Messages appear on your computer screen as the projector is recognized and the software is installed automatically.

6.Follow the instructions on the screen to install the Epson USB Display software. If you see a “Digital Signature Warning,” select Continue or Continue Anyway. (You will see these instructions only the first time you connect.)

After the software is installed, you see your computer’s current desktop displayed by the projector. You can switch the projector to other image sources using the Source Search or Search button on the remote control or the projector.

7.You can connect an optional audio cable if you want to play sound through the projector (see page 32).

When you’ve finished making connections, see Chapter 2 for instructions on displaying and adjusting the image.

When you’re done projecting from your computer, disconnect the USB cable.

30

Setting Up the Projector

Image 30

Contents User’s Guide Important Safety Information Copyright Notice Trademarks Page CContents Restoring the Default Settings Customizing Power and OperationStarting a Slideshow Selecting Slideshow Display Options Resetting the Lamp Timer Checking Lamp Usage What To Do When the Lights Come On or FlashSolving Problems With the Remote Control Page Welcome Using Your Documentation Projector Parts HdmiProjector Control Panel Remote Control Map Projector Dimensions Registration and Warranty Optional AccessoriesELPDA01 1Setting Up the Projector Unpacking the Projector Additional ComponentsYou can place the projector in a variety of viewing setups Positioning the ProjectorDetermining Projection Distance ImageScreen size Wide to Tele Projection distance a Screen size Wide to Tele Offset B Connecting to Video Equipment Connecting an Hdmi Video Source Connecting a Component Video Source Connecting a Composite Video Source Connecting an S-Video Source Connecting an RGB Video Source Connecting to a Computer Connecting to the USB PortUSB TypeB port Connecting to the VGA Computer Port Connecting a Digital Camera or Other USB Device Playing Sound Through the ProjectorIndicator light Inserting an SD Card Turning the Projector On and Off Power light Using the Direct Power On Function Choose Direct Power On and press EnterShutting Down the Projector 2Displayingthe Image and Adjusting Adjusting the Image Selecting an Image SourceAdjusting the Position of the Image Adjusting the Image ShapeFocusing and Zooming the Image Selecting the Color Mode Resizing Video Images 3PresentingControl With the Remote Controlling the Picture and Sound Using the Remote ControlPress the A/V Mute button on the remote control or close Turning Off the Picture and SoundStopping Action Zooming In on Your ImageOperating Your Computer With the Remote Control Controlling the VolumePresenting With the Remote Control Presenting a Slideshow Starting a SlideshowPresenting With the Remote Control Selecting Slideshow Display Options Option Available settings Highlight the options you want to use, and press EnterPresenting With the Remote Control 4Fine-Tuning the Projector Using the Menu System Restoring the Default Settings Fine-Tuning the ProjectorAdjusts the color depth of the image Adjust the desired options as neededAdjusts the difference between light and dark areas Adjusts the balance of green to magenta in the imageAdjusting Signal Settings Video Signal composite or S-Video signals only Customizing Projector Features Raises or lowers the volume of the projector’s speakerCustomizing Power and Operation Create a custom startup screen, as described onUsing the Projector Security Features Select a language to use for the projector menusEnabling Password Protection Starting the Projector With a Password Password screen closes and projection beginsCreating Your Own Startup Screen If projection does not begin, check the followingWhen you see the message Completed, press Menu to exit Capturing the ImageChoosing When to Display the Image Disabling the Projector’s ButtonsUsing Security Locking Fine-Tuning the Projector 5Maintaining the Projector Cleaning the Lens Cleaning the Projector CaseCleaning the Air Filter Replacing the Air Filter Maintaining the ProjectorReplacing the Lamp Hold the lamp as shown and pull it straight out Resetting the Lamp Timer Select the Reset menu and press Enter. You see this screen Checking Lamp UsageReplacing the Remote Control Batteries When replacing batteries, take the following precautionsTransporting the Projector Maintaining the Projector 6Solving Problems Using On-Screen Help What To Do When the Lights Come On or Flash Checking Projector StatusError lights status Solving Projector Operation Problems Solving Problems With the Image or SoundYou can also try resetting all of the menu settings see If you’re using a PC notebookMessage Not Supported is displayed Image isn’t square, but keystone-shaped Computer Component Video port Adjust the Sync setting to increase the image sharpness Image is too light or dark, or colors are incorrectSolving Problems With the Remote Control Projector doesn’t respond to remote control commandsWhere To Get Help Epson provides these technical support servicesSpeak to a Support Representative Purchase Supplies and Accessories Solving Problems ATechnical Specifications GeneralProjection Lamp Remote ControlDimensions ElectricalSafety and Approvals EnvironmentalCompatible Video Formats Computer, component video, composite video, and S-VideoWSXGA60 Hdmi signals Important Safety Instructions BNotices102 103 FCC Compliance Statement For United States UsersIndex Index 107 108 109