Univex 700 manual Selecting an Image Source, Adjusting the Image

Selecting an Image Source

You may need to select the image source if you have multiple image sources connected to the projector (such as a computer or DVD player). Selecting the image source lets you switch between images input from different pieces of connected equipment.

If you don’t see the image you want, press the Search button or one of the Source buttons on the remote control, or press the Source Search button on the projector.

	Source
Search	Search
button	button
Source
buttons

If you still can’t see an image or can’t project the same image that is on your notebook or computer screen, see page 85 for solutions.

You can also select Slideshow to project from a USB device or SD card. See page 50 for instructions.

Adjusting the Image

Once you see your image, you may need to make certain adjustments:

■If the image is too high or too low, reposition it as described on page 41.

■If the image isn’t square, see page 41.

■To focus or zoom your image, see page 42.

■To quickly adjust the color mode, see page 43.

■To change the image size (aspect ratio), see page 44.

■If you need to fine-tune the image and/or sound, see “Fine-Tuning the Projector” on page 55.

40

Displaying and Adjusting the Image