Univex 700 manual Connecting a Component Video Source

Page 25

Connecting a Component Video Source

If your video equipment has component video connectors (three connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can use the component-to-VGA video adapter that came with your projector and

acomponent video cable, or you can purchase a component-to-VGA video cable from Epson (see page 15) or an electronics dealer.

1.Connect one end of your component video cable to the Y/Cb/Cr (or Y/Pb/Pr) connectors on your player.

2.Connect the component end of the component-to-VGA video adapter to the free end of the component video cable.

3.Connect the VGA end of the adapter to the Computer (Component Video) port on your projector.

Computer (Component Video) port

4.You may need to change the Input Signal setting in the projector’s Signal menu to Auto (see page 60).

5.If you want to play sound through the projector, see page 32 for instructions on connecting an audio cable.

When you’ve finished making connections, see page 35 for instructions on turning on the projector and Chapter 2 for instructions on displaying and adjusting the image.

Setting Up the Projector

25

Image 25

Contents User’s Guide Important Safety Information Copyright Notice Trademarks Page CContents Customizing Power and Operation Restoring the Default SettingsStarting a Slideshow Selecting Slideshow Display Options What To Do When the Lights Come On or Flash Resetting the Lamp Timer Checking Lamp UsageSolving Problems With the Remote Control Page Welcome Using Your Documentation Hdmi Projector PartsProjector Control Panel Remote Control Map Projector Dimensions Optional Accessories Registration and WarrantyELPDA01 1Setting Up the Projector Additional Components Unpacking the ProjectorPositioning the Projector You can place the projector in a variety of viewing setupsImage Determining Projection DistanceScreen size Wide to Tele Projection distance a Screen size Wide to Tele Offset B Connecting to Video Equipment Connecting an Hdmi Video Source Connecting a Component Video Source Connecting a Composite Video Source Connecting an S-Video Source Connecting an RGB Video Source Connecting to the USB Port Connecting to a ComputerUSB TypeB port Connecting to the VGA Computer Port Playing Sound Through the Projector Connecting a Digital Camera or Other USB DeviceIndicator light Inserting an SD Card Turning the Projector On and Off Power light Choose Direct Power On and press Enter Using the Direct Power On FunctionShutting Down the Projector 2Displayingthe Image and Adjusting Selecting an Image Source Adjusting the ImageAdjusting the Image Shape Adjusting the Position of the ImageFocusing and Zooming the Image Selecting the Color Mode Resizing Video Images 3PresentingControl With the Remote Press the A/V Mute button on the remote control or close Using the Remote ControlControlling the Picture and Sound Turning Off the Picture and SoundZooming In on Your Image Stopping ActionControlling the Volume Operating Your Computer With the Remote ControlPresenting With the Remote Control Starting a Slideshow Presenting a SlideshowPresenting With the Remote Control Selecting Slideshow Display Options Highlight the options you want to use, and press Enter Option Available settingsPresenting With the Remote Control 4Fine-Tuning the Projector Using the Menu System Fine-Tuning the Projector Restoring the Default SettingsAdjusts the difference between light and dark areas Adjust the desired options as neededAdjusts the color depth of the image Adjusts the balance of green to magenta in the imageAdjusting Signal Settings Video Signal composite or S-Video signals only Raises or lowers the volume of the projector’s speaker Customizing Projector FeaturesCreate a custom startup screen, as described on Customizing Power and OperationSelect a language to use for the projector menus Using the Projector Security FeaturesEnabling Password Protection Password screen closes and projection begins Starting the Projector With a PasswordIf projection does not begin, check the following Creating Your Own Startup ScreenCapturing the Image When you see the message Completed, press Menu to exitDisabling the Projector’s Buttons Choosing When to Display the ImageUsing Security Locking Fine-Tuning the Projector 5Maintaining the Projector Cleaning the Projector Case Cleaning the LensCleaning the Air Filter Maintaining the Projector Replacing the Air FilterReplacing the Lamp Hold the lamp as shown and pull it straight out Resetting the Lamp Timer Checking Lamp Usage Select the Reset menu and press Enter. You see this screenWhen replacing batteries, take the following precautions Replacing the Remote Control BatteriesTransporting the Projector Maintaining the Projector 6Solving Problems Using On-Screen Help Checking Projector Status What To Do When the Lights Come On or FlashError lights status Solving Problems With the Image or Sound Solving Projector Operation ProblemsIf you’re using a PC notebook You can also try resetting all of the menu settings seeMessage Not Supported is displayed Image isn’t square, but keystone-shaped Computer Component Video port Image is too light or dark, or colors are incorrect Adjust the Sync setting to increase the image sharpnessProjector doesn’t respond to remote control commands Solving Problems With the Remote ControlEpson provides these technical support services Where To Get HelpSpeak to a Support Representative Purchase Supplies and Accessories Solving Problems General ATechnical SpecificationsDimensions Remote ControlProjection Lamp ElectricalEnvironmental Safety and ApprovalsComputer, component video, composite video, and S-Video Compatible Video FormatsWSXGA60 Hdmi signals BNotices Important Safety Instructions102 103 For United States Users FCC Compliance StatementIndex Index 107 108 109