note
Lamp life results will vary depending upon mode selected, environmental conditions, and usage.
Turn off this product when not in use to prolong the life of the projector.
You can set the projector to automatically turn off the lamp and enter “sleep mode” when it has not received any signals for 1 to 30 minutes (see page 62). This conserves electricity, cools the projector, and extends the life of the lamp. If you want to start projecting again, press the P power button. If you are done using the projector, unplug the power cord.
Shutting Down the Projector
This projector incorporates Instant Off technology. To turn it off, you can press its P power button as described below, unplug it, or turn off a power switch that supplies power to the projector. You don’t have to wait for the projector to cool down first.
1.To turn off the projector, press the P power button on the remote control or projector.
You see a confirmation message. (If you don’t want to turn it off, press any other button.)
2.Press the P power button again. The projection lamp turns off and the projector beeps twice. You can then unplug the power cord.
If you want to turn the projector on again, make sure the orange P power light is not flashing, then press the P power button.
38
Setting Up the Projector