Integrated Peripherals
AMIBIOS SETUP – INTEGRATED PERIPHERALS
( C ) 1999 American Megatrends, Inc. All Rights Reserved
OnBoard Serial Port A | Auto |
OnBoard Serial Port B | Auto |
Serial PortB Mode | Normal |
Duplex Mode | N/A |
OnBoard Parallel Port | Auto |
Parallel Port Mode | ECP |
Parallel Port DMA | Auto |
Parallel Port IRQ | Auto |
AC97 Audio | Auto |
MC97 Modem | Auto |
♦ | OnBoard Legacy Audio | Enabled |
| ♦ Sound Blaster | Disabled |
| ♦ SB I/O Base Address | |
| ♦ SB IRQ Select | 5 |
| ♦ SB DMA Select | 1 |
♦ | Disabled | |
| ♦ | |
♦ | Game | Enabled |
|
|
|
ESC: Quit | ↑↓→ ← : Select Item | |
F1 | : Help | |
F5 | :Old Values | (Shift)F2:Color |
F6 | : Load BIOS Defaults | |
F7 | : Load SETUP Defaults | |
Figure 9: Integrated Peripherals
This items will be available when ”Serial PortB Mode” is set to IrDA or ASK IR.
♦These eight items will be shown when there are only AC’97 CODEC sound.
• On Board Serial Port A
Auto
3F8/COM1
2F8/COM2
3E8/COM3
2E8/COM4
Disabled
BIOS will automatically setup the port A address.
(Default Value)
Enable on Board Serial port A and address to 3F8.
Enable on Board Serial port A and address to 2F8.
Enable on Board Serial port A and address to 3E8.
Enable on Board Serial port A and address to 2E8.
Disable on Board Serial port A.
•On Board Serial Port B
Auto
3F8/COM1
2F8/COM2
3E8/COM3
2E8/COM4
Disabled
BIOS will automatically setup the port B address.
(Default Value)
Enable on Board Serial port B and address to 3F8.
Enable on Board Serial port B and address to 2F8.
Enable on Board Serial port B and address to 3E8.
Enable on Board Serial port B and address to 2E8.
Disable on Board Serial port B.
•Serial Port B Mode
Normal
IrDA
ASK IR
Normal operation. (Default Value)
Onboard I/O chip supports IRDA
Onboard I/O chip supports ASK IR.
•Duplex Mode
Half Duplex
N/A
Full Duplex
IR Function Duplex Half.
Disabled this function. (Default Value)
IR Function Duplex Full.
•On Board Parallel port
378 | Enable On Board LPT port and address to 378. |
278 | Enable On Board LPT port and address to 278. |
3BC | Enable On Board LPT port and address to 3BC. |
Auto | Set On Board LPT port to Auto. (Default Value) |
Disabled | Disable On Board LPT port. |
33