AMD 7ZX-1 user manual How to recover from the STR sleep mode?

7ZX-1 Motherboard

C. Select the “Advanced” tab and “Standby” mode in Power Buttons.

D. Restart your computer to complete setup.

Now when you want to enter STR sleep mode, just momentarily press the “Power on” button.

A.4 How to recover from the STR sleep mode?

There are five ways to “wake up” the system:

1.Press the “Power On” button.

2.Use the “Resume by Alarm” function.

3.Use the “Modem Ring On” function.

4.Use the “Wake On LAN” function.

5.Use the “USB Device Wake Up” function.

A.5 Notices:

1.In order for STR to function properly, several hardware and software requirements must be satisfied:

A.Your ATX power supply must comply with the ATX 2.01 specification (provide more than 720 mA 5V Stand-By current).

B.Your SDRAM must be PC-100 / PC-133 compliant.

2.Jumper JP8 is provided to connect to the STR LED in your system chassis. [Your chassis may not provide this feature.] The STR LED will be illuminated when your system is in STR sleep mode.

STR LED Connector External. 1

+ DIMM LED

19