Supported Hardware/Software Combinations
To determine the ASIC revision for a specific NI, use the show ni command. For example, the following show ni output display shows a B2 revision level for NI 1:
| |
Module in slot 1 |
|
Model Name: | |
Description: | |
Part Number: | |
Hardware Revision: | C13, |
Serial Number: | G1511279, |
Manufacture Date: | MAY 03 2006, |
Firmware Version: | , |
Admin Status: | POWER ON, |
Operational Status: | UP, |
Power Consumption: | 51, |
Power Control Checksum: | 0x0, |
MAC Address: | 00:d0:95:e6:54:80, |
ASIC - Physical 1: | BCM56504_B2 |
CPLD - Physical 1: | 0005/00 |
UBOOT Version : | 6.1.1.167.R02 |
No Miniboot | |
POE SW Version : | n/a |
To determine the CMM board revision, use the show cmm command. For example, the following show cmm output display shows a C revision level for the CMM board:
| ||
Module in slot |
| |
Model | Name: | |
Description: | FABRIC BOARD, | |
Part Number: | ||
Hardware Revision: | C11, | |
Serial Number: | G1810128, | |
Manufacture Date: | MAY 08 2006, | |
Firmware Version: | 2, | |
Admin | Status: | POWER ON, |
Operational Status: | UP, | |
Power | Consumption: | 27, |
Power | Control Checksum: | 0x0, |
MAC Address: | 00:d0:95:e0:6c:ac, |
page 10 | OmniSwitch |