Alcatel-Lucent 6850, 9000, 6800 user manual Table gets dropped due to the overload

				Supported Traps
	No.	Trap Name	Platforms	Description
59		gmHwVlanRuleTableOverloadAlert	all	An overload trap occurs whenever a
				new entry to the hardware VLAN rule
				table gets dropped due to the overload
				of the table.
60		lnkaggAggUp	all	Indicates the link aggregate is active.
				This trap is sent when any one port of
				the link aggregate group goes into the
				attached state.
61		lnkaggAggDown	all	Indicates the link aggregate is not
				active. This trap is sent when all ports
				of the link aggregate group are no
				longer in the attached state.
62		lnkaggPortJoin	all	This trap is sent when any given port
				of the link aggregate group goes to the
				attached state.
63		lnkaggPortLeave	all	This trap is sent when any given port
				detaches from the link aggregate
				group.
64		lnkaggPortRemove	all	This trap is sent when any given port
				of the link aggregate group is
				removed due to an invalid configura-
				tion.
65		pktDrop	all	The pktDrop trap indicates that the
				sending agent has dropped certain
				packets (to blocked IP ports, from
				spoofed addresses, etc.).
66		monitorFileWritten	all	A File Written Trap is sent when the
				amount of data requested by the user
				has been written by the port monitor-
				ing instance.
67		alaVrrp3TrapProtoError	all	Indicates that a TTL, checksum, or
				version error was encountered upon
				receipt of a VRRP advertisement.
68		alaVrrp3TrapNewMaster	all	The SNMP agent has transferred from
				the backup state to the master state.
69		gmHwMixModeSubnetRuleTableOverloadAlert	—	This trap is not supported in the cur-
				rent release.
70		pethPwrSupplyConflict	—	This trap is not supported in the cur-
				rent release.

OmniSwitch 6800/6850/9000—Release 6.1.3.R01 page 41