Open Problem Reports and Feature Exceptions
PR 100607
Accessing WebView > Security > Servers using Netscape, a window may appear asking for user name selection on an OS6850 when adding a new server.
Workaround: Close the window and ignore. This window shown is not a WebView
PR 106670
On an OS9000, the ipxServTable returns the name of the IPX SAP. This is a variable length name. The SNMP standard specifies that variable length strings should be preceded by a length byte. Some SNMP applications could have problems with this.
Workaround: There is no known workaround at this time.
PR 106869
In WebView > Layer 2 > VLAN Mgmt > VLANs Add page, on an OS9000, an error message appears whenever user enters VLAN ranges to be created that include more than 63 VLANs at once.
Workaround: Break desired VLAN range to create into smaller ranges (63 or less). (Note: This configu- ration setting limit occurs all throughout WebView.)
PR 106914
In WebView System > System Mgmt > Install page, on an OS9000, the file transfer fails in a dual NIC (Network Interface Card) environment.
Workaround: Momentarily disable the network of the NIC not in use for the transfer and
PR 107228
In WebView Physical > Health > Port Statistics page after clearing statistics, the last port of the slot may display values other than zeroes on an OS9000.
Workaround: Please ignore
PR 107283
On an OS6850, when the supplicant fails the authentication with the external authentication server and if user configured a "failed" vlan on the device classification policy, then AOS is going to locally authenti- cate the supplicant. In CLI, the "show" command will show as
Workaround: Look at which vlan the supplicant is authorized and that can tell if the supplicant learned on the user defined "failed" VLAN.
page 52 | OmniSwitch |