Alcatel-Lucent 9000, 6800, 6850 user manual Open Problem Reports and Feature Exceptions

Page 81

Open Problem Reports and Feature Exceptions

PR 96327

Extra display character in the swlog. No effect on the switch.

Workaround: There is no known workaround at this time.

PR 96584

On an OS9000, during a reload, when the fabric LED is turned off and on, there is no effect on the switch.

Workaround: There is no known workaround at this time.

PR 98768

If hardware configuration changes are introduced to an OS6800/6850 stack without first ensuring that the Primary software configuration is certified, it is possible to create an endless synchronization cycle.

Workaround: Before making any hardware configuration changes ensure that the Primary is certified. Run the copy working certified flash-syncrocommand before making hardware configuration changes.

PR 98956

An OS6850 supports only single point of failure. Removing multiple stacking cables will introduce multi- ple points of failure from which the system may not recover.

Workaround: Do not remove multiple stacking cables at the same time.

PR 100244

Installing 6.1.3.R01 images on an OmniSwitch 6800 that is running 5.3.1.R02 code returns an error.

Workaround: The code base has changed significantly from 5.3.1 to 6.1.2. This is especially true of Jos.img. So the install from 5.3.1 will not be able to support them. Reboot the 6.1.2 images and then do the install.

PR 100825

On an OS9000, if both CMMs are removed from the chassis, Layer 2 local (local to the NI) traffic with learned MACs is switched.

Workaround: Insert at least one CMM into the switch to reset the NIs.

PR 103625

Pulling all the cable simultaneously on a stack of 8 OS6850's causes problem.

Workaround: When pulling the cable, the system will start its topology change. Pull the cable one by one during the topology change will lose the topology information. Try to pull the cable slowly to avoid this problem.

OmniSwitch 6800/6850/9000—Release 6.1.3.R01

page 81

Image 81
Contents Page Related Documentation OmniSwitch 6800 Series Getting Started guideUpgrade Instructions for 6.1.3.R01 OmniSwitch 6850 Series OmniSwitch 6800 SeriesOmniSwitch 9000 Series Memory RequirementsNew Hardware Supported OS9800-CMM New Chassis Management Module CMMOmniSwitch 9600 Support for PS-510W AC/PS-360W AC OmniSwitch 9000 OS-IP-SHELF PoE Power ShelfGigabit Ethernet Transceiver SFP MSA Dual Speed Ethernet Transceivers100FX Ethernet Transceivers Supported Hardware/Software Combinations Module Type Part Number3.R01 Asic Physical Feature Platform Software Package New Software FeaturesVlan Range Support BGP4 Software SupportedPIM-SM 802.1x Device Classification Access Guardian 802.1W Rstp Default802.1Q 802.1Q 2005 MstpAccess Control Lists ACLs for IPv6 Access Control Lists ACLsACL & Layer 3 Security Source ipv6 destination ipv6 ipv6 Nh next header flow-labelACL Manager Authenticated Switch Access Authenticated VLANsAutomatic Vlan Containment AVC BGP Graceful Restart Basic IPv4 RoutingBpdu Shutdown Ports Command Line Interface CLIDhcp Relay Dhcp Option-82 Relay Agent Information OptionDNS Client Dynamic Vlan Assignment MobilityEnd User Partitioning Eupm Ethernet Interfaces HTTP/HTTPS Port ConfigurationGeneric UDP Relay Health StatisticsInterswitch Protocol Amap IP Multicast Switching IpmsIP DoS Enhancements IP Multicast Switching Ipms Proxying IP Route Map RedistributionIPv6 NPD L2 Dhcp Snooping IPX RoutingL2 MAC Address Table Size Enhancement L2 Static Multicast AddressesLearned Port Security LPS Link Aggregation static & 802.3adMulticast Routing Multinetting NTP ClientOSPFv2/OSPFv3 Policy Based Routing Permanent Mode Partitioned Switch ManagementPer-VLAN Dhcp Relay Policy Server ManagementQuality of Service QoS Power over Ethernet PoEPort Mapping Port MirroringRedirect Policies Port and Link Aggregate Router Discovery Protocol RDPRouting Protocol Preference Secure Copy SCP Secure Shell SSH Public Key AuthenticationSecure Shell SSH SSH Software Supported Operating SystemsSmart Continuous Switching OmniSwitch Smart Continuous Switching OmniSwitch 6800/OmniSwitchServer Load Balancing SLB SFlowSoftware Rollback Source LearningText File Configuration Switch LoggingSpanning Tree Syslog to Multiple HostsVlan Range Support User Definable Loopback InterfaceVlan Stacking and Translation VRRPv2/VRRPv3Web-Based Management WebView Trap Name Platforms Description Supported TrapsTrap Name Platforms Description Sion which was active on a slot cannot Trap Name Platforms Description Table gets dropped due to the overload Unsupported Software Features Unsupported CLI CommandsSoftware Feature Unsupported CLI Commands RIP MIB Name Unsupported MIB variables Alcatel IND1AAA Unsupported MIBsAlcatel IND1Bgp Alcatel IND1LAGAlcatelIND1Slb MIB Name Unsupported MIB variables AlcatelIND1QoSAlcatelIND1VlanManager MIB Name Unsupported MIB variablesIetfsnmp Open Problem Reports and Feature Exceptions Command Line Interface CLIProblem Reports SFlow RmonWeb-Based Management WebView Feature ExceptionsOpen Problem Reports and Feature Exceptions Open Problem Reports and Feature Exceptions Autonegotiation LayerBridging Ethernet Interfaces Open Problem Reports and Feature Exceptions Group Mobility IP Multicast Switching IpmsPort Mirroring/Monitoring Link AggregationSource Learning Open Problem Reports and Feature Exceptions Open Problem Reports and Feature Exceptions Spanning Tree Open Problem Reports and Feature Exceptions Vlan Stacking Dhcp Snooping Basic IP RoutingIPv6 Open Problem Reports and Feature Exceptions UDP Relay Server Load Balancing SLBAdvanced Routing OSPFv3 DvmrpPIM General Quality of Service includes ACLsPolicy Manager Security 802.1x Authenticated Switch Access Policy Server Management Authenticated VLANsSystem Open Problem Reports and Feature Exceptions Chassis Supervision Open Problem Reports and Feature Exceptions Power Over Ethernet Open Problem Reports and Feature Exceptions Redundancy / Hot Swap Hot Swap Time Limitations for OmniSwitchOpen Problem Reports and Feature Exceptions Region Phone Number Technical Support