AMX NI-700/900 Setting the Configuration DIP Switch for the Program Port, Baud Rate Settings

Page 17

Connections and Wiring

Connections and Wiring

Setting the Configuration DIP Switch (for the Program Port)

Prior to installing the Controller, use the Configuration DIP switch to set the baud rate used by the Program port for communication. The Configuration DIP switch is located on the front of the Integrated Controllers.

Baud Rate Settings

Before programming the on-board Master, make sure the baud rate you set matches the communication parameters set on both your PC’s COM port and those set through your NetLinx Studio v 2.4.

By default, the baud rate is set to 38,400 (bps).

Baud Rate Settings on the Configuration DIP Switch

Baud Rate

Position 5

Position 6

Position 7

Position 8

 

 

 

 

 

 

9600 bps

OFF

ON

OFF

ON

38,400 bps (default)

OFF

ON

ON

ON

57,600 bps

ON

OFF

OFF

OFF

115,200 bps

ON

ON

ON

ON

Note the orientation of the Configuration DIP Switch and the ON position label. DIP switches 2,3, and 4 must remain in the OFF position at all times.

Program Run Disable (PRD) Mode

You can also use the Program port’s Configuration DIP switch to set the on-board Master to Program Run Disable (PRD) mode according to the settings listed in the table below.

PRD Mode Settings

PRD Mode

Position 1

 

 

 

Normal mode (default)

OFF

PRD Mode

ON

The PRD mode prevents the NetLinx program stored in the on-board Master from running when you power up the Integrated Controller. This mode should only be used when you suspect the resident NetLinx program is causing inadvertent communication and/or control problems.

If necessary, place the on-board Master in PRD mode and use the NetLinx Studio v 2.4 program to resolve the communication and/or control problems with the resident NetLinx program. Then download the new NetLinx program and try again.

NI-700 & NI-900 Hardware Reference Guide

13

 

 

Image 17
Contents NI-700/900 AMX Limited Warranty and Disclaimer Table of Contents Table of Contents NI-700 & NI-900 Hardware Reference Guide NI-700 Overview NI-700 SpecificationsNetLinx Integrated Master Controller Features See the NI-700 On-Board Memory Specifications section on NI-700 SpecificationsIR RX Rear Panel ComponentsNI-700 On-Board Memory Specifications NI-700 On-Board Memory SpecificationsNI-700 Port Assignment And Functionality NI-700 Port AssignmentsNI-900 Overview NI-900 SpecificationsFront Panel Components NI-900 SpecificationsSurge damage NI-900 Port Assignments NI-900 Port Assignment And FunctionalityNI-900 On-Board Memory Specifications NI-900 On-Board Memory SpecificationsTimeKeeper Related DocumentsIntroduction NI-700 & NI-900 Hardware Reference Guide DevicePortSystem DPS Installing into an Equipment RackInstallation Baud Rate Settings Setting the Configuration DIP Switch for the Program PortProgram Run Disable PRD Mode Baud Rate Settings on the Configuration DIP SwitchWorking With the Configuration DIP Switch Program Port Connections and WiringProgram Port, Pinouts, and Signals Program Port Connector Pin SignalPort Assignments and Functionality Modes and Front Panel LED Blink PatternsAXlink Port and LED Modes and LED Blink PatternsWiring Length Guidelines Wiring GuidelinesPreparing Captive Wires Wiring Guidelines NI-700 @ 280 mAUsing the 4-pin Mini-Phoenix Connector For Data and Power Wiring a Power ConnectionRS-232 RS-422 RS-485 DB9 Device Port Connections and WiringRS-232/422/485 Device Port Wiring Specifications IRX-RX Port Connection and WiringPin FunctionPin Signal Function Input/Output I/O Port Connections and WiringPort Wiring Specifications Ethernet/RJ-45 Port Connections and Wiring IR/Serial Port Connections and WiringIR/Serial Connector Wiring Specifications per Port Ethernet RJ-45 Pinouts and SignalsEthernet LEDs RJ-45 wiring diagramPort type Description Standard Port # Ethernet Ports Used By the Integrated ControllerEthernet Port Descriptions Page Page It’s Your World Take Control

NI-700/900 specifications

The AMX NI-700/900 series represents a significant advancement in the realm of audio-visual management solutions, catering primarily to corporate, educational, and large-scale event environments. Designed for versatility and ease of use, the NI-700 and NI-900 serve as pivotal components in modern audio-visual applications, ensuring seamless integration and superior performance.

The NI-700 features a compact design that is perfect for smaller installations, boasting a powerful processor capable of handling multiple video and audio sources simultaneously. It allows for flexible input configurations, with support for HDMI, VGA, and analog audio, making it compatible with a vast array of devices. The user interface is intuitive, designed for both novice and expert users, with customizable presets that streamline the operation of complex systems.

On the other hand, the NI-900 is engineered for larger environments, where its enhanced processing capabilities truly shine. It supports an extended range of inputs and outputs, including multiple HDMI ports and robust audio distribution options. The NI-900 also features advanced signal processing technology, ensuring high-quality audio and video performance, essential for critical presentations and high-stakes events. Both models incorporate built-in support for networked control, allowing users to manage and monitor their systems remotely.

One of the standout features of the AMX NI-700/900 series is their integration with AMX's extensive software ecosystem. This includes the AMX Rapid Project Maker, which simplifies the programming process, enabling quick deployment and configuration of AV systems. The devices also support various third-party control protocols, ensuring compatibility with existing infrastructure and devices.

Durability and reliability are key attributes of the NI-700 and NI-900. Built with high-quality components, these units are designed for continuous operation in demanding environments. Their foam-filled metal chassis protect against physical damage while maintaining a professional aesthetic.

In summary, the AMX NI-700/900 series epitomizes innovation in AV control technology. With their compact designs, extensive input/output options, advanced processing capabilities, and seamless integration with AMX software, these devices stand out as essential tools for achieving high-performance audio-visual management in diverse settings, ensuring that presentations and events are executed flawlessly.