AMX NI-700/900 Program Port Connections and Wiring, Working With the Configuration DIP Switch

Page 18

Connections and Wiring

Think of the PRD Mode (On) equating to a PC’s SAFE Mode setting. This mode allows a user to continue powering a unit, update the firmware, and download a new program while circumventing any problems with a currently downloaded program. Power must be cycled to the unit after activating/deactivating this mode on the Program Port DIP switch #1.

Working With the Configuration DIP Switch

1.Disconnect the power supply from the 2-pin PWR (green) connector on the rear of the NetLinx Integrated Controller.

2.Set DIP switch positions according to the information listed in theBaud Rate Settings on the Configuration DIP Switch andPRD Mode Settings tables.

3.Reconnect the 12 VDC-compliant power supply to the 2-pin 3.5 mm mini-Phoenix PWR connector.

Program Port Connections and Wiring

The Integrated Controllers are equipped with a Program port located on the front of the unit. Use an RS232 programming cable to establish a connection between this Program port to your PC's COM port. This connection provides communication with the NetLinx Integrated Controller. Then you can download NetLinx programs to this on-board Master using the NetLinx Studio v 2.4 software program. Refer to the NetLinx Studio instruction manual for programming instructions. The following table shows the rear panel Program Port connector (male), pinouts, and signals.

Program Port, Pinouts, and Signals

Program Port Connector

Pin Signal

2RX

3TX

5GND

5

9

7

RTS

8

4

8

CTS

 

3

 

 

 

 

2

1 7

6

Male

When wiring the 422/485 connections, do NOT use pre-made 9-wire cable or connect the wire in the cable to any connection that will not be used by the DB9 serial port. Only use wiring that connects the needed pins.

14

NI-700 & NI-900 Hardware Reference Guide

Image 18
Contents NI-700/900 AMX Limited Warranty and Disclaimer Table of Contents Table of Contents NI-700 & NI-900 Hardware Reference Guide NI-700 Specifications NetLinx Integrated Master Controller FeaturesNI-700 Overview NI-700 Specifications See the NI-700 On-Board Memory Specifications section onRear Panel Components IR RXNI-700 Port Assignment And Functionality NI-700 On-Board Memory SpecificationsNI-700 On-Board Memory Specifications NI-700 Port AssignmentsNI-900 Specifications NI-900 OverviewNI-900 Specifications Front Panel ComponentsSurge damage NI-900 Port Assignment And Functionality NI-900 Port AssignmentsTimeKeeper NI-900 On-Board Memory SpecificationsNI-900 On-Board Memory Specifications Related DocumentsIntroduction NI-700 & NI-900 Hardware Reference Guide Installing into an Equipment Rack DevicePortSystem DPSInstallation Program Run Disable PRD Mode Setting the Configuration DIP Switch for the Program PortBaud Rate Settings Baud Rate Settings on the Configuration DIP SwitchProgram Port, Pinouts, and Signals Program Port Connections and WiringWorking With the Configuration DIP Switch Program Port Connector Pin SignalAXlink Port and LED Modes and Front Panel LED Blink PatternsPort Assignments and Functionality Modes and LED Blink PatternsPreparing Captive Wires Wiring GuidelinesWiring Length Guidelines Wiring Guidelines NI-700 @ 280 mAWiring a Power Connection Using the 4-pin Mini-Phoenix Connector For Data and PowerDB9 Device Port Connections and Wiring RS-232 RS-422 RS-485Pin IRX-RX Port Connection and WiringRS-232/422/485 Device Port Wiring Specifications FunctionInput/Output I/O Port Connections and Wiring Port Wiring SpecificationsPin Signal Function IR/Serial Connector Wiring Specifications per Port IR/Serial Port Connections and WiringEthernet/RJ-45 Port Connections and Wiring Ethernet RJ-45 Pinouts and SignalsRJ-45 wiring diagram Ethernet LEDsEthernet Ports Used By the Integrated Controller Ethernet Port DescriptionsPort type Description Standard Port # Page Page It’s Your World Take Control

NI-700/900 specifications

The AMX NI-700/900 series represents a significant advancement in the realm of audio-visual management solutions, catering primarily to corporate, educational, and large-scale event environments. Designed for versatility and ease of use, the NI-700 and NI-900 serve as pivotal components in modern audio-visual applications, ensuring seamless integration and superior performance.

The NI-700 features a compact design that is perfect for smaller installations, boasting a powerful processor capable of handling multiple video and audio sources simultaneously. It allows for flexible input configurations, with support for HDMI, VGA, and analog audio, making it compatible with a vast array of devices. The user interface is intuitive, designed for both novice and expert users, with customizable presets that streamline the operation of complex systems.

On the other hand, the NI-900 is engineered for larger environments, where its enhanced processing capabilities truly shine. It supports an extended range of inputs and outputs, including multiple HDMI ports and robust audio distribution options. The NI-900 also features advanced signal processing technology, ensuring high-quality audio and video performance, essential for critical presentations and high-stakes events. Both models incorporate built-in support for networked control, allowing users to manage and monitor their systems remotely.

One of the standout features of the AMX NI-700/900 series is their integration with AMX's extensive software ecosystem. This includes the AMX Rapid Project Maker, which simplifies the programming process, enabling quick deployment and configuration of AV systems. The devices also support various third-party control protocols, ensuring compatibility with existing infrastructure and devices.

Durability and reliability are key attributes of the NI-700 and NI-900. Built with high-quality components, these units are designed for continuous operation in demanding environments. Their foam-filled metal chassis protect against physical damage while maintaining a professional aesthetic.

In summary, the AMX NI-700/900 series epitomizes innovation in AV control technology. With their compact designs, extensive input/output options, advanced processing capabilities, and seamless integration with AMX software, these devices stand out as essential tools for achieving high-performance audio-visual management in diverse settings, ensuring that presentations and events are executed flawlessly.