AMX AXB-TM5 RO,offset, Sendcommand AXBTMX,RO,5, SP,IR out, Sendcommand AXBTMX,SP,25

Programming

System Send_Commands (Cont.)

Command	Description
'RO',<offset>	Sets the offset value subtracted from the IR function before sending
	the code to the AXC-EM.
	Syntax:
	"'RO',<offset>"
	Variables:
	Offset = 0 through 255
	Example:
	SEND_COMMAND AXBTMX,"'RO',5"
	Subtracts 5 from the incoming IR code number and sends the
	appropriate IR function from the AXB-TM5 to the control system.
'SP',<IR out>'	Generates a single <IR out> function pulse.
	Syntax:
	"'SP',<IR out>'"
	Variables:
	IR out = 1 through 127.
	The ’CTON’ sets pulse length and ’CTOF’ sets time between pulses.
	Example:
	SEND_COMMAND AXBTMX,"'SP',25"
	Pulses IR code 25 which decreases the volume level on the
	equipment connected to the AXB-TM5.
XCH <Channel>	Transmit the IR code in the format set with the XCHM mode
	command.
	Syntax:
	SEND_COMMAND <DEV>,'XCH <Channel>'
	Variable:
	<Channel> = 0 through 999

14 AXB-TM5 Television Manager