AMX NXC-ME260 instruction manual Product Information, Front and rear panel components

Page 5

Product Information

Product Information

The NXC-ME260 Master-Ethernet Card is a Master Card for NetLinx systems with a 10/100BaseT TCP/IP Ethernet connection, and an RJ-11 SPE (Server Port Expander) connector for use with an AXB-SPE (Server Port Expander). The NXC-ME260 is the only Master Card you need, as it incorporates the functionality of all previous NetLinx Master Cards (NXC-M, NXC-ME, and NXC-MPE).

Beyond replacing the previous set of NetLinx Master Cards, the NXC-ME260 represents a high- performance NetLinx Master Controller. With double the Flash memory (16 MB) and a more powerful processor (Coldfire 5407), the ME260 is faster than previous NetLinx Masters.

The NXC-MPE260 can be loaded in the Master Card slot of an NXF NetLinx Cardframe, in an NXI Integrated Controller, or in an NXM-MHS Module, as shown in FIG. 1.

Front and rear panel components

FIG. 1 shows the front and rear panel components of the NXC-ME260.

Input LED (yellow)

Output LED (red)

Status LED (green)

NXC-ME260

Master-Ethernet

12VDC

PWR

PROGRAM

 

 

 

 

SPEED

 

 

FD

 

GND

AXM

AXP

PWR

RTS

CTS

TX

RX

GND

AXlink PROGRAM

STATUS

INPUT

Front

9-pin PROGRAM port

Ethernet 10/100 connector

Ethernet 10/100 LEDs

ICSNet connectors/LEDs

ICSHub IN/OUT connectors/LEDs

IN

OUTRear

ICSNetICSHub

PROGRAM port connector AXLink connector AXLink status LED (green) Expansion Out connector

12 VDC power supply connector

FIG. 1 Front and rear panel components

NXC-ME260 NetLinx Master-Ethernet Card/Module

1

 

 

 

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents NXC-ME260 AMX Limited Warranty and Disclaimer Table of Contents Main Security Menu Default Security Configuration Input LED yellow Output LED red Status LED green Product InformationFront and rear panel components NXM-ME260 Specifications SpecificationsEthernet Ports Used by the ME260 Ethernet ports used by the ME260Rear panel LEDs ICSNet/ICSHub Modes and front panel LED blink patternsModes and LED Blink Patterns Layout of Ethernet LEDs Rear panel LEDs EthernetProduct Information Setting the Program Port DIP Switch Installation and WiringBaud rate settings Program Run Disable PRD modeSetting the Program Port DIP switch Program Port Connections/WiringPreparing/connecting captive wires DB-9 Program Port, Pinouts, and SignalsICSHub RJ-45 Connections/Wiring ICSNet RJ-45 Connections/WiringPin Program Port Pinouts and Signals ICSNet RJ-45 Pinouts/SignalsICSHub OUT port Ethernet 10/100 Base-T RJ-45 Connections/WiringICSHub in port Expansion in port RJ-11 SPE Port Connection/WiringRJ-45 Plug RJ-45 wiring diagram Expansion OUT connector on rear of NXC-ME260 SPE Connector Pinouts and SignalsTX enable No connect SPE cable pinout informationMounting the Modules Into an Equipment Rack RJ-11 Plug RJ-11 wiring diagramMounting the NXC-ME260 in an NXF CardFrame or NXI Master Card slot on NXF CardFrame rear panelReplacing the Lithium Batteries Battery CR2032 type 20mm coin cell SocketPC COM Port Communication Settings Program Port CommandsProgram Port Commands ProgrammingTime SET DateSET Time Device Status DPSMEM Disk FreeGET IP DPS Pass DPS Reboot DPSPing IP Address Program InfoSendcommand DPS Route ModeDirectnormal Sendstring DPSShow Combine SET URL DPSShow Device DPS Displays a list of any combined devices ExampleShow Notify Show LOGShow System Show RemoteShow Route ESC Pass Codes ESC Pass CodesTCP List URL List DPSLinux Telnet client Windows client programsSending Firmware to a NetLinx Device KIT file Firmware TransfersFirmware Transfers NetLinx Security NetLinx Security FeaturesSecurity Terms Used in This Document UserAccess Rights PasswordUser Name Group NameAccessing the Security configuration options Initial Setup via Telnet or Terminal ConnectionGetting connected ContMaster must be rebooted after changing the Http setting Display system security options for NetLinx Master Security Options MenuEdit User Menu Add userEdit User Edit User Menu Access Rights MenuDelete user Access Rights MenuShow the list of authorized users Add GroupEdit Group Menu Enables access to the user directory and all filesEdit Group Menu Add directory association Subdirectories in the user directoryEdit Group menu List directory associations Edit Group menu Change Access RightsEdit Group menu Delete directory association Delete Group Edit Group menu Display Access RightsEdit Group Display Telnet Timeout in seconds Set Telnet Timeout in secondsShow List of Authorized Groups Make changes permanent by saving to flashMain Security Menu Main Security MenuDefault Security Configuration Help Menu Options Help menuLogging Into a Session Help Security Setup SecurityLogout AMX reserves
Related manuals
Manual 106 pages 58.54 Kb

NXC-ME260 specifications

The AMX NXC-ME260 is a cutting-edge piece of machinery designed to meet the demands of modern industrial environments. This equipment stands out due to its superior performance, enhanced efficiency, and innovative technologies, making it suitable for a wide range of applications.

One of the primary features of the NXC-ME260 is its robust design. Built with high-quality materials, this machine is engineered to withstand rigorous operating conditions, ensuring durability and longevity. The compact structure allows it to fit seamlessly into various workspaces, making it an ideal choice for operations with limited space.

Equipped with a powerful motor, the NXC-ME260 delivers exceptional speed and torque. This enables it to handle demanding tasks with ease, resulting in increased productivity. The machine’s advanced control system ensures precise operation, making it user-friendly and efficient. Its intuitive interface allows operators to quickly adapt to its functionalities, minimizing training time and boosting operational efficiency.

The NXC-ME260 integrates state-of-the-art technologies that enhance its performance. One of the standout features is its energy-efficient design, which reduces power consumption without compromising output. This makes the machine not only cost-effective but also an environmentally responsible choice for companies looking to reduce their carbon footprint.

Another significant technology incorporated in the NXC-ME260 is its intelligent monitoring system. This system provides real-time data on machine performance, allowing operators to make informed decisions and perform proactive maintenance. By predicting potential issues before they arise, the NXC-ME260 minimizes downtime and maintenance costs, ensuring uninterrupted operations.

Safety is paramount in any industrial setting, and the NXC-ME260 excels in this regard. It is equipped with multiple safety features, including emergency stop mechanisms and overload protection, ensuring operator safety and reducing the risk of accidents.

In summary, the AMX NXC-ME260 represents a convergence of power, efficiency, and safety-focused design. Its robust construction, advanced motor performance, intelligent monitoring system, and energy-efficient operation make it an invaluable asset for any industrial operation. Whether in manufacturing, logistics, or other sectors, the NXC-ME260 is engineered to enhance productivity while ensuring a safe working environment. Overall, this machine exemplifies the future of industrial equipment, bringing together technology and efficiency for optimal performance.
Top Page Image Contents