Antec DF-35 user manual Standard ATX Power Supply Installation

Page 14

2.3

Note: The DF-35 comes with a CPU cutout on the motherboard tray, which

will allow you to change your CPU heatsink without removing the motherboard.

STANDARD ATX POWER SUPPLY INSTALLATION

The DF-35 can accommodate a standard-size ATX power supply.

1.With the case upright, place the power supply on the bottom of the case.

PSU resting on the standard PSU mount.

2.Push the power supply to the back of the case and align the mounting holes.

3.Attach the power supply to the case with the screws provided.

14

Image 14
Contents Advanced Gaming Force DF-35 USER’S Manual Table of Contents Introduction Getting to Know Your Case Case Specifications Before YOU Begin Locating and Positioning Your Computer Installation Setting UP Page Motherboard Installation Now remove your motherboard by lifting it up Standard ATX Power Supply Installation Cable Management Internal 3.5 Device Installation External 3.5 Device Installation Using FLEET-SWAP Preparing Your FLEET-SWAP Sata Bays for USEMoving or removing a Fleet-Swap bay One example of Ahci configuration your motherboard may vary Grasp the top and bottom of your HDD. Now pull the HDD free Using the TOP 2.5 HOT-SWAP BAY External 5.25 Device Installation Internal 2 Device Installation Front I/O AC’97 / HD Audio Ports Power Switch / Reset Switch / Hard Disk Drive LED Connectors Rewiring Motherboard Header ConnectionsSystem Included Fans TOP 140 MM Twocool FAN Front 120 MM White LED FansRear Exhaust 120 MM Twocool White LED Fans Optional FansWashable AIR Filters Version 1.0.0 06/28/2010