Antec DF-35 user manual One example of Ahci configuration your motherboard may vary

Page 20

One example of AHCI configuration – your motherboard may vary

B.LOADING THE FLEET-SWAP BAYS

Fleet-Swap™ bays are designed to be accessible from the front of the case, through the Fleet-Release™ access doors.

1.Open the Fleet-Release™ access door, and insert your 3.5” SATA device into a 3.5” drive bay that contains a Fleet-Swap bay at the back.

2.Push gently until it engages the adapter pins on the Fleet-Swap bay and stops in position. Do not secure the device with screws if you want it to be removable.

Loading a Fleet-Swap drive.

3.Mount any other 3.5” HDD devices accordingly.

4.Close the Fleet-ReleaseTM Access Door.

C. UNLOADING THE FLEET-SWAPBAYS

1.Ensure that your HDD is not in use.

2.Open the Fleet-ReleaseTMAccess Door by pressing the left side to release it, and then swing it open.

20

Image 20
Contents Advanced Gaming Force DF-35 USER’S Manual Table of Contents Introduction Getting to Know Your Case Case Specifications Before YOU Begin Locating and Positioning Your Computer Installation Setting UP Page Motherboard Installation Now remove your motherboard by lifting it up Standard ATX Power Supply Installation Cable Management Internal 3.5 Device Installation External 3.5 Device Installation Using FLEET-SWAP Preparing Your FLEET-SWAP Sata Bays for USEMoving or removing a Fleet-Swap bay One example of Ahci configuration your motherboard may vary Grasp the top and bottom of your HDD. Now pull the HDD free Using the TOP 2.5 HOT-SWAP BAY External 5.25 Device Installation Internal 2 Device Installation Front I/O AC’97 / HD Audio Ports Power Switch / Reset Switch / Hard Disk Drive LED Connectors Rewiring Motherboard Header ConnectionsSystem Included Fans TOP 140 MM Twocool FAN Front 120 MM White LED FansRear Exhaust 120 MM Twocool White LED Fans Optional FansWashable AIR Filters Version 1.0.0 06/28/2010