Cable Management

Use these screws to secure your power supply to the case.

Note: Power supplies with fans on the bottom of the power supply will need to be mounted so that the fan is facing the top of the case. The DF-35 provides mounting holes for power supplies with standard mounting layouts to be installed right side up or upside down.

2.4

There is a cable management compartment behind the 3.5” drive cage. You can tuck or route excess cables in this compartment.

1.Locate the cable management compartment with cable ties located behind the walls of the 3.5” drive cage.

2.Tuck or route your excess cables to the compartment. This will keep the cables from interfering with airflow in your case and help with cooling.

3.Use the cable ties provided to hold them in place.

Note: If you plan to use the Fleet-Swap feature, you should leave one or two cables with four SATA connectors in the main compartment, so that they will be able to reach the Fleet- Swap bay without stretching.