D-Link DGS-1005G manual Preface, Revision Date

Page 2

ENGLISH

Preface

D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.

Manual Revisions

Revision

Date

Description

1.0February 18, 2010 DGS-1005G - Hardware revision A1

1.1

May 18, 2010

Added Windows® 7 Support

Trademarks

D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.

Copyright Statement

No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.

Copyright ©2010 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

2

Image 2
Contents Page Preface Revision DateTable of Contents Safety Instructions Safety CautionsEnglish Protecting Against Electrostatic Discharge Setup IntroductionFast Ethernet Technology Gigabit Ethernet TechnologyJumbo Frame Support Switching Technology802.1p Priority Tagging Features Hardware Overview Top Panel LEDsLink/Act/Speed Power IndicatorCable Diagnostics − LED Indications Open, Short, or Improper TerminationAuto MDI/MDI-X Ports Power JackRear Panel Connections Installation Before You Connect to the NetworkMounting on a wood wall Mounting the Switch on the WallMounting on a cement wall Connecting To Network Backbone or Server Connecting the SwitchHub/Switch to DGS-1005G DGS-1005G to End NodeTroubleshooting Does the DGS-1005G switch have an uplink port?Networking Basics Check your IP addressStatically Assign an IP address StepGlossary Bootp CSMA/CDMDI IPXLAN Rmon MDI-XMIB RPSUDP TCP/IPTftp VlanTechnical Specifications EMIMAC Address Learning RJ-45 Pin SpecificationsPacket Filtering / Forwarding Rate Internet Support Contacting Technical SupportPhone Support Registration