D-Link DGS-1005G manual Glossary

Page 20

ENGLISH

Glossary

1000BASE-LX

A short laser wavelength on multimode fiber optic cable for a maximum length of 550 meters.

1000BASE-SX

A long wavelength for a “long haul” fiber optic cable for a maximum length of 10 kilometers.

100BASE-FX

100Mbps Ethernet implementation over fiber.

100BASE-TX

100Mbps Ethernet implementation over Category 5 and Type 1 Twisted Pair cabling.

10BASE-T

The IEEE 802.3 specification for Ethernet over Unshielded Twisted Pair (UTP) cabling.

Aging

The automatic removal of dynamic entries from the Switch Database which have timed-out and are no longer valid.

ATM

Asynchronous Transfer Mode. A connection oriented transmission protocol based on fixed length cells (packets). ATM is designed to carry a complete range of user traffic, including voice, data, and video signals.

Auto-Negotiation

A feature on a port, which allows it to advertise its capabilities for speed, duplex, and flow control. When connected to an end station that also supports auto-negotiation, the link can self-detect its optimum operating setup.

Backbone Port

A port that does not learn device addresses, and that receives all frames with an unknown address. Backbone ports are normally used to connect the Switch to the backbone of your network. Note that backbone ports were formerly known as designated downlink ports.

Backbone

The part of a network used as the primary path for transporting traffic between network segments.

20

Image 20
Contents Page Preface Revision DateTable of Contents Safety Instructions Safety CautionsEnglish Protecting Against Electrostatic Discharge Setup IntroductionFast Ethernet Technology Gigabit Ethernet TechnologyJumbo Frame Support Switching Technology802.1p Priority Tagging Features Hardware Overview Top Panel LEDsPower Indicator Cable Diagnostics − LED IndicationsLink/Act/Speed Open, Short, or Improper TerminationAuto MDI/MDI-X Ports Power JackRear Panel Connections Installation Before You Connect to the NetworkMounting on a wood wall Mounting the Switch on the WallMounting on a cement wall Connecting the Switch Hub/Switch to DGS-1005GConnecting To Network Backbone or Server DGS-1005G to End NodeTroubleshooting Does the DGS-1005G switch have an uplink port?Networking Basics Check your IP addressStatically Assign an IP address StepGlossary Bootp CSMA/CDMDI IPXLAN MDI-X MIBRmon RPSTCP/IP TftpUDP VlanTechnical Specifications EMIMAC Address Learning RJ-45 Pin SpecificationsPacket Filtering / Forwarding Rate Internet Support Contacting Technical SupportPhone Support Registration