Altinex MX2416RM, MX2414RM manual RS-232 Protocol, Vern

Page 9

SWITCHERS

IBM PIN No.

MX2416RM PIN No.

2

2

3

3

5

5

Connection IBM-PC 9-pin D to MX2416RM 9-pin D Note: 4, 6, 8 shorted together in IBM side only.

Port setting preferences for the control system or computer being used to control the switcher should be set as follows:

BAUD RATE (Bits per second)

2400

Data bits

8

Parity

None

Stop Bits

1

There is no software or hardware flow control implemented. The RS-232 input has a 6-character buffer and will not execute additional commands until the previous command is fully processed.

7.2 RS-232 PROTOCOL

[INP0]

All channels OFF

[INP1]

Select Input 1

[INP2]

Select Input 2

[INP3]

Select Input 3

[INP4]

Select Input 4

[INP5]

Select Input 5

[INP6]

Select Input 6

[RSET]

Reset unit to user defaults

[VERN]

Returns firmware version

 

numbers

Inputs 5 & 6 are not selectable on the MX2414RM

Commands must be issued as shown, in ALL CAPS and with the brackets [ ] included in the command string. After processing a valid command, an [OK] string will be returned. A command echo will also follow the [OK].

For instance, a command of [INP1] would return [OK][INP1]. The [VERN] command will return the corresponding software version being used by the switcher, such as an error string, [ERR] will be returned.

If the control system being used is not setup to wait for the [OK] string, it is important to include a 100 milliseconds delay between each command.

The MX2416RM Switcher is also designed to send feedback commands from the switcher to the control system when the buttons on the front panel of the switcher are pressed.

The feedback codes are as follows:

Key

Description

Feedback

pressed

 

Code

1

Input Select

[INP1]

2

Input Select

[INP2]

3

Input Select

[INP3]

4

Input Select

[INP4]

5

Input Select

[INP5]

6

Input Select

[INP6]

STAND BY

All Outputs OFF

[INP0]

RESET

Reset

[RSET][INPx]

Inputs 5 & 6 are not selectable on MX2414RM.

The following commands are added to the standard set of commands in order to facilitate control of multiple units using a single RS-232 control port. These commands are available on the switcher that has firmware revision number: 2.0. Use [VERN] commands to determine the firmware revision. These commands add additional flexibility to the switcher.

[InnOmm]

nn -

Input Number 00 to 99

mm- Output Number 01-99

This command connects any input to any output. The switching occurs as soon as the command is completed. The input 00 is used to disconnect a particular output from any input. For example, command [I00O01] will disconnect output 1 from any input.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents MX2416RM/MX2414RM Introduction Table of ContentsPrecautions / Safety Warnings MX2416RM/MX2414RM General About Your Switcher Technical SpecificationsDescription of MX2416RM Reset Button Auto Switch Mode ButtonSelect Input Stand by / ALL Channels OFF ButtonPower UP Default SET Application DiagramPower Supply BI-DIRECTIONAL SwitchingInstalling Your Switcher OperationCONGRATULATIONS! YOU are Done Vern RS-232 ProtocolMaster-Slave Analog Switch Voltage Connection MASTER-SLAVE ConfigurationContact Closure ONE Wire Analog Control MX2416RM 9-pin DLoop Control with RS-232 Command Manual Loop ControlMX2416RM Loop Accessories Frequently Asked Questions Troubleshooting GuideMX2416RM Altinex Policy Limited WarrantyReturn Policy Contact Information

MX2414RM, MX2416RM specifications

The Altinex MX2416RM and MX2414RM are advanced, multi-input, and multi-output audio-video switchers designed to meet the demands of modern AV environments. These units stand out for their reliability, versatility, and performance, making them suitable for various applications such as conference rooms, auditoriums, and educational institutions.

One of the standout features of the MX2416RM is its ability to handle up to 16 input sources and distribute to multiple outputs seamlessly. This capability allows for great flexibility in selecting and switching between different video and audio sources, enhancing the overall AV experience. Similarly, the MX2414RM, designed to switch up to 14 inputs, maintains high-quality output standards, making it ideal for setups with slightly lesser requirements.

Both models incorporate advanced signal routing technology, ensuring that video signals remain crisp and clear without degradation. They support a wide range of resolutions, including HD, 4K, and other high-definition formats, catering to the needs of modern displays and projectors. With support for various input and output formats, including HDMI, VGA, and component video, these switchers can handle multiple types of AV gear seamlessly.

Another significant characteristic of the MX2416RM and MX2414RM is their user-friendly interface. Both units feature intuitive control options, including front-panel buttons, remote control functionality, and integration capabilities with popular control systems. This ease of use makes it simple for operators to manage input and output selections, making them ideal for any user, regardless of technical skill.

The robust design of these switchers also contributes to their reliability. Built with high-quality components, they are designed to withstand the rigors of daily use in busy environments. The redundant power supply option in these units ensures uninterrupted operation, which is crucial in critical AV settings.

Additionally, both models come equipped with ample diagnostic features, including LED indicators for quick status checks and troubleshooting. The integration of advanced technologies, such as automatic input scaling and seamless switching, enhances the user experience further, providing a smooth transition between sources without any noticeable delay.

In summary, the Altinex MX2416RM and MX2414RM are powerful solutions for anyone looking to manage multiple AV inputs and outputs efficiently. With their extensive features, superior audio and video quality, and user-friendly interfaces, they represent a significant advancement in AV switcher technology, making them invaluable tools in any professional AV setup.
Top Page Image Contents