Summary of Commands VER, Off, Help, Clr | Altinex MT104-108 instruction

MULTI-TASKER™

[G1]: will return feedback as ON12 G1U0.

[G2]: will return feedback as ON2 G2U0.

14. [RD]

This command displays the members in each group.

Command Format: [RDGkUi]

Gk	= group number (k = # from 1-9)
Ui	= unit number (i = # from 0-9)

member = C1 - C19 (card 1 to max cards)

Example:

The cards in slots 1, 2 and 19 are part of group 5 in unit 1. Read the member data for group 5 of unit 1, by sending the command [RDG5U1]. The system will return feedback as follows:

C1C2C19 G5U1.

7.3 SUMMARY OF COMMANDS

1)	[VER]	Receives software version
2)	[Ci]	Receives status of the card
3)	[CiS]	Saves card configuration
4)	[ON]	Turns on one or more outputs for
		a single card or a group of cards
5)	[OFF]	Turns off one or more outputs for
		a single card or a group of cards
6)	[…S]	Save the command configuration
7)	[…F]	Provides feedback upon sending
8)	[…P]	Sets the path, preload for [SW]
9)	[SW]	Switch preloaded output buffer
10)	[HELP]	Display available commands
11)	[WR]	Groups multiple cards
12)	[CLR]	Clears members of a single group
		or all groups
13)	[G]	Requests group data
14)	[RD]	Displays group members

7.3 SUMMARY OF COMMANDS

[VER]

[OFF]

[HELP]

[CLR]