Device Setting
You can set the device by using the function key in the Device Setting Dialog box.
Configuration Setting: In this Configuration Setting, you can set the IP Address, Subnet Mask, Gateway, Set Trap to (Trap IP Address), System name, and Location.
Select the device in the Discovery list or Monitor List and press this button, then the Configuration Setting window will pop up (Figure 10). After filling in the data that you want to change, you must fill in the password and press the “Set” button to process the data change immediately. The default password of this
Figure 10. Configuration Setting
Password Change: You can use this when you need to change the password. Fill in the required passwords in the dialog boxes and press the “Set” button to process the password change immediately.
Figure 11. Password Change
16