Trap Setting
The Trap Setting enables the device to monitor the Trap through the Web Management Utility, set the Trap IP Address of the manager where the trap to be sent.
Figure 39. Trap Setting
System Events: Monitoring the system’s trap. Device Bootup: a trap when booting up the system.
Illegal Login: a trap when there is using a wrong password login, and it will record from where the IP to be login.
Fiber Port Events: Monitoring the Fiber port status.
Link Up/Link Down: a trap when there is linking status happens in fiber port.
Abnormal* Receive Error: a trap when there are receive data error in fiber port.
Abnormal* Transmit Error: a trap when there are transmit data error in fiber port.
Copper Port Events: Monitoring the Copper port status.
Link Up/Link Down: a trap when there is linking status happens in copper port.
Abnormal* Receive Error: a trap when there are receive data error in copper port.
Abnormal* Transmit Error: a trap when there are transmit data error in copprt port.
Abnormal*: 50 error packet count within 10 seconds.
37