2:SAVE (Card Settings)
SAVE THIS SETTING?
1:YES
2:NO
KEY=
3: CLEAR (Set to Defaults)
RESET CARD TO FACTORY DEFAULT:
*All Outputs: Connected To Input1
*All Outputs: Turned On
1:YES
2:NO
KEY=
4: ON/OFF (Turn Outputs On/Off)
TOGGLE ON/OFF: ENTER A NUMBER
0:All OFF
1:Out1 (ON)
2:Out2 (ON)
3:Out3 (ON)
4:Out4 (ON)
5:Out5 (ON)
6:Out6 (ON)
7:Out7 (ON)
9:All ON
ESC: GO BACK; S:STATUS KEY=
5:
SWITCH IN-OUT: ENTER A NUMBER
ESC: GO BACK; S:STATUS
In
2:SETUP
1: SET GROUP ID
CURRENT GROUP ID: NONE
1: ASSIGN GROUP ID
ASSIGN GROUP ID: ENTER NUMBER
1:Group 1
2:Group 2
3:Group 3
4:Group 4
5:Group 5
6:Group 6
7:Group 7
8:Group 8
ESC: GO BACK
KEY=
2: REMOVE GROUP ID
REMOVE GROUP ID: ENTER NO
ESC: GO BACK
KEY=
ESC: GO BACK
KEY=
2: SET MATRIX CONFIG
CURRENT MATRIX: NOT APPLICABLE
ESC: GO BACK
KEY=
3: SET SYNC DELAY
SELECT OUTPUT: ENTER NUMBER
1:SDL1=00 (00.00 Sec)
2:SDL2=00 (00.00 Sec)
3:SDL3=00 (00.00 Sec)
4:SDL4=00 (00.00 Sec)
5:SDL5=00 (00.00 Sec)
6:SDL6=00 (00.00 Sec)
7:SDL7=00 (00.00 Sec)
8:SDL8=00 (00.00 Sec)
ESC: GO BACK
KEY=
ESC: GO BACK
KEY=
20 |